Remko WP HTS 90 IM, versatile in use 255122

Housing in an attractive design made of EPP plastic in combination with a silver-painted sheet steel front (RAL 9006) with full-surface designer font and integrated Smart Control for regulating the heating system and energy management
Technical description: Basic equipment
Device installation and alignment on the floor using the feet supplied . Speed-controlled circulation pump Grundfoss UPML25-105 180 PWM for heating water circulation and high-performance plate heat exchanger (condenser) for heat transfer, electronically controlled injection valve and frequency converter are installed. Speed-controlled scroll compressor. The use of neodymium magnets has increased torque and minimised friction losses. Pulse-width modulation for optimum sinusoidal characteristics. Mounted on vibration dampers for low vibration and quiet running, with high efficiency, motor protection against overcurrent and thermal overload, interior equipped with special sound insulation as standard. The inverter technology enables high efficiency at low outside temperatures. Protected against liquid hammer on the suction side by a generously dimensioned liquid separator. Safety chain consisting of a temperature sensor, pressure sensors, overheating protection and overcurrent protection. All functions are monitored and controlled by a microprocessor, and a microprocessor-controlled demand defrosting system with circuit reversal ensures low defrosting cycles. refrigeration circuit with R 410A refrigerant with filter, receiver, 4-way changeover valve, inverter compressor and electronic expansion valve. Service/filling connections with lockable valves. The refrigeration circuit is pressure-tested, leak-tested, dried, evacuated and filled with refrigeration machine oil. Refrigeration circuit pre-filled for a maximum single pipe length of 10 metres. The maximum permissible pipe length is 50 metres, with an integrated flow sensor for measuring and ensuring the minimum flow rate, flow and return sensors and a manual air vent. An electronically controlled bypass valve is integrated to ensure the minimum flow rate. The control box is prepared for the electrical connection of two mixed heating circuits, one unmixed heating circuit and a solar thermal system. All hydraulic pipe connections and refrigerant connections are led out at the top. Effective comfort air conditioning is realised by reversing the cooling circuit. A flow temperature between +7°C and +25°C can be selected in cooling mode. The three-way valve, available as an accessory, activates a separate hydraulic circuit with corresponding cooling insulation. For surface cooling, a separate SmartControl control panel can be used as a remote control in the living area for dew point monitoring. A 9 kW heating element (Smart-Serv) can be optionally installed in the indoor module for monoenergetic operation and emergency operation. The Smart BVT accessory set is available for the external integration of a boiler (gas/oil) with a separate pump for bivalent alternative operation. However, a buffer is then required as a hydraulic separator. Minimum water volume 5 litres per KW heating output
REMKO Smart Control
The intuitive control software with plain text menu and commissioning assistant makes installation, maintenance and integration of additional modules easier for the installer. The attractively designed control panel is integrated into the front and can also be used for wall mounting.Control with integrated microprocessor control for weather-compensated flow temperature control in heating mode with full text display and animation. Domestic hot water priority switching in heating mode. The Remko Smart Control has a particularly energy-saving control system through the use of a single high-efficiency circulation pump or for one unmixed heating circuit (radiators) and two mixed heating circuits (underfloor heating), including heating circuit pump switching and mixer valve control. Solar control including circulation pump switching via temperature difference measurement is also possible, and the micro SD card supplied saves the temperature curves and other data. Colour display with energy balances, diagrams and animations. Continuous function monitoring Summer mode, heating mode, standby (frost protection), power supply shutdown, screed drying programme, time programmes with different setpoint settings. Commissioning wizard, legionella control. Fault display with suggestions for troubleshooting Own power consumption optimised control through smart heating/cooling of the PV system via S0 interface. And a night setback to minimise noise.


Accessories available:
Refrigerant lines
Smart Serv (9kW heating element with emergency heating function)
Smart Count (heat meter)
Smart Web (Ethernet interface for connection to a router)
Smart BVT external (for external integration of a 2 unit heating system)
Further accessories see sales documents

Environmental protection regulations and laws must be observed.


Technical performance data:
Type designationREMKO HTS 90
Application limits heating [°C]-20 to +45
Number of indoor modules/outdoor modules1/1
Heating output min. max. [kW]1.5-9.5
Energy efficiency class heatingA+
Nominal heating capacity at A12/W35 1) [kW]10.96
Nominal heating capacity at A7/W35 1) [kW]8.05
Nominal heating capacity at A2/W35 1) [kW]6.20
Nominal heating capacity at A-7/W35 1) [kW]5, 73
Nominal heating output at A-15/W35 1) [kW]5.65
COP at A12/W35°/HZ 1) 4./61
COP at A7/W35°/HZ 1) 4.82/61
COP at A2/W35°/HZ 1) 3, 98/60
COP at A-7/W35°/HZ 1) 3.32/61
COP at A-15/W35°/HZ 1) 3.12/61
Flow temperature heating water max. [°C]+63
Cooling application limits [°C]+15 to +45
Cooling capacity min. max.[kW]1.05-7.84
Cooling capacity A35/W7 [KW/EER2)/HZ]6.83/2.51/66
Cooling capacity A35/W18 [KW/EER2)/HZ]6.92/3.78/66
Cooling capacity A27/W18 [KW/EER2)/HZ]6.79/3.41/66
Max. flow temperature of cooling water [°C]+7
RefrigerantR 410 A
Refrigerant quantity [kg]1.80
Refrigerant connections,3/8‘ / 5/8’
Refrigerant line without top-up, max. length [m]10.0
Refrigerant line, length max.[m]50.0
Height difference refrigerant line, max. [m]30.0
Voltage supply IM [V/~/Hz]230/1/50
Voltage supply heating element [V/~/Hz]400/1/50
Nominal power consumption (A7/W35) [kW]1.67
Nominal current consumption (A7/W35) [A]7.23
Nominal water flow rate [m³/h]1.50
External pressure loss [kPa] 80
max. Max. operating pressure water [bar]3
Piping to be used on site [mm]28
Sound power level IN nominal/max. LwA [dB(A)]36/38
Sound pressure level IN nominal/max. /max 3) [dB(A)]31/33
Sound pressure level IN night mode3) [dB(A)]30
Dimensions (H/W/D) [mm]1050/775/700
Internal module weight [kg]170.00

1) COP = Coefficient Of Performance according to EN 14511, TÜV tested
2) EER=Energy Efficiency Ratio according to EN 14511
3) 5m free field hemispherical dispersion A7/W55/58Hz measurement according to DIN EN 12102 and DIN EN ISO 9614-2

The appliances comply with the relevant EU regulations and are CE-marked in accordance with the applicable directives. The devices have been tested by an accredited testing institute.