Remko WP HTS 110 IM, versatile in use 255094

Indoor unit HTS 110
Air/water heat pump for heating or cooling in split version.
Enclosure in an attractive design in combination with sound insulation and a silver-painted sheet steel front (RAL 9006) and integrated Smart Control. Refrigeration circuit with R 410A refrigerant with filter, receiver, 4-way changeover valve, scroll compressor and electronic expansion valve.

Included as standard:
Remko Smart Control
Safety unit with SIV, automatic air vent and pressure gauge
2 1‘ shut-off valves with thermometer
1’ dirt filter
Fill and drain tap ½”
1 external sensor,
1 immersion sensor (intended for DHW heating)

Accessories available:
Refrigerant pipes
Electric condensate drain heater
Overflow valve 1”
Contact and immersion sensors for integrating additional system components
Smart Control cable remote control
Smart Count (heat meter)
Smart-BVT external integration (bivalent alternative operation)
Smart Serv (9 kW elect. Additional heating)
Smart Com (integration into a Smart Home system e.g. KNX)
3-way changeover valve for domestic hot water preparation
Highly efficient heating circuit pump groups unregulated/regulated
Pipe feed-through for 100 mm pipe/borehole

REMKO Smart Control
The intuitive controller software with plain text menu and commissioning wizard makes installation, maintenance and integration of additional modules easier for the installer.
Control with integrated microprocessor control for weather-compensated flow temperature control in heating mode in full text display and animation.

Technical performance data:
Type designationREMKO HTS 110
Energy efficiency class average 35/55°CA++/A++
Nominal heat output Prated7.0/8.0
Eta s average 35/55°C161/127
Max. Flow temperature60
Nominal heating capacity at A12/W35 1) [kW]10.51
Nominal heating capacity at A7/W35 1) [kW]9.89
Nominal heating capacity at A2/W35 1) [kW]7, 11
Nominal heating capacity at A-7/W35 1) [kW]6.38
Nominal heating capacity at A-15/W35 1) [kW]5.92
COP at A12/W35°/HZ 1) 5.44
COP at A7/W35°/HZ 1) 4, 78
COP at A2/W35°/HZ 1) 3.80
COP at A-7/W35°/HZ 1) 3.25
COP at A-15/W35°/HZ 1) 2.71
Cooling capacity A35/W7 KW/EER 2)/HZ 6.08/2, 36
Cooling capacity A35/W18 KW/EER 2)/HZ 8.03/2.88
Cooling capacity A27/W18 KW/EER 2)/HZ 8.59/3.48
Nominal water flow rate [m³/h]1.78
Max. flow temperature of heating water [°C] 60
Application limits heating [°C] -20 to +42
Application limits cooling [°C]+15 to +45
RefrigerantR 410A
Refrigerant quantity/CO² equivalent [kg/t]2.95/6.1
Air volume flow outdoor unit, max. [m³/h]2,700
Sound power level indoor module LpA [dB(A)] 43
Sound pressure level max. indoor module LpA [dB(A)] 21
Sound power level outdoor module LpA [dB(A)] 56
Sound pressure level max. outdoor module LpA [dB(A)] 56
Sound pressure level max. Outdoor module LpA [dB(A)] 34
Voltage supply comp. IM [V/~/Hz]400V/3~/50
Smart Control power supply IM [V/~/Hz]230/1/50
Electric immersion heater power supply IM [V/~/Hz] 400V/3~/50
Nominal power consumption (A7/W35) [kW]2, 06
Nominal current consumption (A7/W35) [A]3.01
Refrigerant connections3/8‘ / 5/8’
Hydraulic connections flat-sealing 1”
Refrigerant line without refilling, max. length [m]5.0
Refrigerant line, length max. [m]50.0
Height difference refrigerant line, max. [m]30.0
Height outdoor module [mm] 1. 020
Diameter outdoor unit [mm]630
Dimensions indoor unit HxWxD [mm]1065x650x650
Weight indoor unit [kg]160.00
Weight outdoor unit [kg]120.00

1) COP = Coefficient Of Performance according to EN 14511, TÜV tested
2) EER=Energy Efficiency Ratio according to EN 14511
3) Free field according to DIN EN 12102/ISO9614-2, TA-Lärm must be taken into account

The appliances comply with the relevant EU regulations and are CE-labelled in accordance with the applicable directives. The units have been tested by VDE.