Remko HTS 200 IM Duo, versatile in use 255201

Consisting of two HTS 200 indoor modules

HTS 200 indoor module
Air/water inverter heat pump for heating or cooling in split version.
Elegant housing made of silver-painted sheet steel in combination with sound insulation and a silver-painted sheet steel front (RAL 9006) and integrated Smart Control. Refrigeration circuit with R 410A refrigerant with filter, receiver, 4-way changeover valve, speed-controlled rotary piston compressor and electronic expansion valve.

Included in the standard scope of delivery:
Remko-Smart Control
Safety group with SIV, automatic air vent and pressure gauge
2 shut-off valves 1‘ with thermometer
Dirt filter 1’
Filling and draining tap ½”
1 outdoor sensor,
1 immersion sensor (intended for DHW heating)
2 refrigerant distributors with corresponding fitting

Available as accessories:
Refrigerant pipes
Electric condensate drain heater
Overflow valve 1”
Contact and immersion sensors for integrating additional system components
Smart Control cable remote control
Smart-Count (heat meter)
Smart-BVT external integration (bivalent alternative operation)
Smart-Serv (9 kW elect. Additional heating)
3-way changeover valve for domestic hot water preparation
Highly efficient heating circuit pump groups unregulated/regulated
Pipe feed-through for 100 mm pipe/bore

REMKO Smart Control
The intuitive controller software with plain text menu and commissioning wizard makes installation, maintenance and integration of additional modules easier for the installer.
Control with integrated microprocessor control for weather-compensated flow temperature control in heating mode in full text display and animation.

Technical performance data:
Type designationREMKO HTS 200 IM
Heating output [kW] 3.0-18.0
Nominal heating output at A12/W35 1) [kW]15.82
Nominal heating output at A7/W35 1) [kW]15.51
Nominal heating output at A2/W35 1) [kW]12, 02
Nominal heating capacity at A-7/W35 1) [kW]9.64
Nominal heating capacity at A-15/W35 1) [kW]8.62
COP at A12/W35°/HZ 1) 5.51/60
COP at A7/W35°/HZ 1) 5, 01/60
COP at A2/W35°/HZ 1) 3.91/60
COP at A-7/W35°/HZ 1) 3.43/60
COP at A-15/W35°/HZ 1) 2.98/60
Cooling capacity A35/W7 KW/EER2)/HZ 10.41/2, 37/54
Cooling capacity A35/W18 KW/EER2)/HZ 12.40/3.51/40
Cooling capacity A27/W18 KW/EER2)/HZ 11.80/3.66/41
Nominal water volume flow [m³/h]2.66
Flow temperature heating water max. [°C] 63
External pressure loss kPa 80
Application limits heating [°C] -20 to +45
Application limits cooling [°C]+15 to +45
RefrigerantR 410 A
Refrigerant quantity [kg]1.80
Sound power level indoor unit LpA [dB(A)] 52
Sound pressure level max. Indoor unit LpA [dB(A)] 30
Voltage supply IM [V/~/Hz]400/3/50
Voltage supply E-heating element IM [V/~/Hz] 400/3/50
Nominal power consumption (A7/W35) [kW]3, 10
Nominal current consumption (A7/W35) [A]5.12
Refrigerant connections3/8‘ / 5/8’
Hydraulic connections flat sealing 5/4”
Refrigerant line without refilling, max. length [m]5.0
Refrigerant line, length max. [m]25.0
Height difference refrigerant line, max. [m]15.0
Internal module dimensions (H/W/D) [mm]1. 065/650/650
Indoor module weight [kg]196.00

1) COP = Coefficient Of Performance according to EN 14511, TÜV tested
2) EER=Energy Efficiency Ratio according to EN 14511
3) Free field according to DIN EN 12102/ISO9614-2, TA-Lärm must be taken into account

The appliances comply with the relevant EU regulations and are CE-labelled in accordance with the applicable directives. The devices have been tested by VDE.