zoom_in
zoom_out
fullscreen
-14%
ELMAG KBM 25 TN SET promotion consisting of: 16035
Sku: T-491492
€795.29 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping
Piece
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-497947 | KBM 16 TN SET promotion consisting of: | 16031 | |
|
T-505344 | KBM 13 TN SET promotion consisting of: | 16030 |
doneTischbohrmaschinen
done1 pc. V-belt bench drill model KBM 25 TN Art. No. 160241 pcs. vice 5’ / 120 mm Art. no. 881432 pcs.
done1 pc. V-belt bench drill model KBM 25 TN Art. No. 160241 pcs. vice 5’ / 120 mm Art. no. 881432 pcs.
KBM 25 TN SET promotion consisting of: 1 pc. V-belt column drill Model KBM 25 TN Art. no. 16024 1 pc. vice 5” / 120 mm Art. no. 88143 2 pcs. locking screws 16mm Art. no. 89039 1 pc. HSS drill set 9 pcs. 14.5-30mm in PVC box Art. no. 82032|Compact professional table drilling machines|This is how professionals drill|The compact KBM 13 TN, 16 TN and 25 TN bench drills feature a proven drive system with a powerful high-quality motor and belt drive. High concentricity is achieved by using precision bearings.
With a drilling capacity in steel of 13, 16 or 25 mm, these models are ideal for ambitious model makers and hobby craftspeople - and for all those who appreciate a professionally equipped workshop.
Clockwise/anticlockwise rotation. Tip: top price for the set offer.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
With a drilling capacity in steel of 13, 16 or 25 mm, these models are ideal for ambitious model makers and hobby craftspeople - and for all those who appreciate a professionally equipped workshop.
Clockwise/anticlockwise rotation. Tip: top price for the set offer.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-491492
SKU manufacturer:
16035
GTIN Code (EAN):
9004853160356
Weight:
90,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Standard equipment:
- Keyless chuck B 16, 1 - 16 mm
- Taper mandrel MK 3 / B 16
- Taper drift
- Tool set
- Operating instructions / CE - Equipment set:
- KBM 25 TN
- Standard equipment
- Machine vice 5” / 120 mm
- 2 clamping screws 16 mm
- HSS drill bit set 9-pc. 14.5-30mm
- TB 125 Vario - klein ganz groß, Die kompakten Tischbohrmaschinen KBM 13 TN, 16 TN und 25 TN
verfügen über ein bewährtes Antriebssystem mit starkem Qualitätsmotor und Riemenantrieb. Durch Verwendung von Präzisionslagern wird eine hohe Rundlaufgenauigkeit erreicht.
Mit einer Bohrleistung in Stahl von 13, 16 bzw 25 mm sind diese
Modelle gut für ambitionierte Modellbauer und Hobbyhandwerker
geeignet - und für alle, die eine professionell ausgestattete Werkstätte zu schätzen wissen. Tipp: Idealer Preis im Set-Angebot. - 1. Bohrerauswahl: Für Metalle: Metallbohrer aus Hochleistungs-Schnellschnittstahl (HSS) verwenden. Hartmetall oder Edelstahl: Metallbohrer mit Titanbeschichtung oder aus einer Kobaltlegierung.
2. Ankörnen: Bohrstelle durch Anreißen mit einer Reißnadel markieren. Einen gehärteten Körnerstift ansetzen und Bohrstelle mit einem kurzen Hammerschlag ankörnen - so kann der Bohrer nicht abrutschen. Bei HSS-Bohrern mit Kreuzanschliff kann das Ankörnen entfallen. Bei großen Bohrdurchmessern mit kleinerem Bohrer vorbohren.
3. Drehzahl: Zur Schonung des Bohrers, hartes Metall bei niedriger Drehzahl und mit geringem Druck bohren. Für weichere Metalle höhere Drehzahl verwenden. Vor dem Durchbruch Druck reduzieren.
4. Kühlen: Bohrer kühlen. Bei langen Bohrungen Bohrer mehr-fach anheben und Kühlflüssigkeit zuführen, ev. Bohrpausen einlegen.
Additional information
Drilling capacity in steel (mm):
25mm
Drilling table area (mm):
300 x 310mm
Drilling table stroke (mm):
360mm
Drilling table rotatable ():
± 180 °
Drilling table swivelling ():
± 45 °
Speed range (UpM):
100 - 2.000UpM
Speed stages ():
16
Base plate area (lxb) (mm):
285 x 495mm
Height (total) (mm):
1.150mm
Displacement (mm):
300x310x680mm
Engine power (W):
1.100W
Mains connection (V/Hz):
400/50-60V/Hz
Pine pitch table min./max. (mm):
110-470mm
Pinole gap (mm):
80mm
Column diameter (mm):
80mm
Spindle reception (rotating spindle) ():
MK 3
Thread pitch (mm):
195mm
T-slots, width (mm):
16mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-14%
KBM 25 S VARIO SET promotion consisting of:
16037
€1,053.49
-14%
KBM 16 SN SET promotion consisting of:
16032
€714.62
-14%
KBM 32 SN SET promotion consisting of:
16034
€1,126.09
-13%
KBM 16 T VARIO SET - promotion consisting of:
16036
€452.26
-14%
KBM 25 SN SET promotion consisting of:
16033
€932.48
-23%
Punch pins (no. 9, 2 pieces)
9403022
€6.76
€8.78 MSRP
-9%
Core drill HSS, 25x30mm
61833
€49.79
-14%
Welding and cutting case
55170
€780.46
-6%
Fine filter including automatic arrester
12620
€212.90
-25%
CA angled impact wrench 1/2”
44706
€269.87
€361.00 MSRP
-20%
Thermal switch 16A
9601972
€39.75
€49.50 MSRP
-29%
BI-METAL cobalt M42 bandsaw blade
78488
€57.48
€81.00 MSRP
-29%
Automatik-Kopfschweißschirm, 2XL-TC Design ’ART’
59370
€69.79
€98.99 MSRP
-7%
Ersatz LED Lampe
9802651
€146.63
-18%
Circuit board & keyboard for HEAT CHAMP 5/11/16 kW
9508255
€211.72
€258.99 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG KBM 25 TN SET promotion consisting of: 16035
16035
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- Standard equipment:
- Keyless chuck B 16, 1 - 16 mm
- Taper mandrel MK 3 / B 16
- Taper drift
- Tool set
- Operating instructions / CE - Equipment set:
- KBM 25 TN
- Standard equipment
- Machine vice 5” / 120 mm
- 2 clamping screws 16 mm
- HSS drill bit set 9-pc. 14.5-30mm