zoom_in
zoom_out
fullscreen
-14%
ELMAG KBM 25 SN SET promotion consisting of: 16033
Sku: T-507677
€932.48 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping within 48h
Piece
doneSäulenbohrmaschinen
done1 pc. V-belt pillar drill model KBM 25 SN Art. No. 160221 Pcs. vice 5’ / 120 mm Art. no. 881432 pcs.
done1 pc. V-belt pillar drill model KBM 25 SN Art. No. 160221 Pcs. vice 5’ / 120 mm Art. no. 881432 pcs.
KBM 25 SN SET promotion consisting of: 1 pc. V-belt column drill Model KBM 25 SN Art. no. 16022 1 pc. vice 5’ / 120 mm Art. no. 88143 2 pcs. locking screws 16mm Art. no. 89039 1 pc. HSS drill set 9 pcs. 14.5-30mm in PVC box Art. no. 82032|Super slim professional column drill 1.100 W|This is how professionals drill|With a maximum quill spacing of 715 mm from the drilling bench, the KBM 25 SN allows machining of tall workpieces and finished welded components. Clamping grooves in the base plate increase the clearance for high moulded parts.
The machine is therefore excellent for repairs in agriculture and for frame construction in metalworking companies. Its solid design and good standard equipment are its distinguishing features.
Clockwise/anticlockwise rotation.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
The machine is therefore excellent for repairs in agriculture and for frame construction in metalworking companies. Its solid design and good standard equipment are its distinguishing features.
Clockwise/anticlockwise rotation.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-507677
SKU manufacturer:
16033
GTIN Code (EAN):
9004853160332
Weight:
105,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Standard features:
- Keyless chuck B 16, 1 - 16 mm
- Taper mandrel MK 3 / B 16
- Drill drift
- Tool set
- Operating instructions/CE - Set Equipment:
- Standard
equipment - Machine vice 5’ / 120 mm
- 2 clamping screws 16 mm
- HSS drill cassette 14.5 -30 mm 9 pcs.
- TB 125 Vario - klein ganz groß, Mit einem maximalen Pinolenabstand zum Bohrtisch von 715 mm ermöglicht die KBM 25 SN die Bearbeitung von hohen Werkstücken und fertig geschweißten Bauteilen. Spannnuten in der Grundplatte
erweitern den Spielraum für hohe Formteile.
Die Maschine ist daher gut für Reparaturen in der Landwirtschaft und
für den Rahmenbau in Metallbaubetrieben geeignet. Sie fällt durch eine grundsolide Ausführung und eine gute Serienausstattung auf. - 1. Bohrerauswahl: Für Metalle: Metallbohrer aus Hochleistungs-Schnellschnittstahl (HSS) verwenden. Hartmetall oder Edelstahl: Metallbohrer mit Titanbeschichtung oder aus einer Kobaltlegierung.
2. Ankörnen: Bohrstelle durch Anreißen mit einer Reißnadel markieren. Einen gehärteten Körnerstift ansetzen und Bohrstelle mit einem kurzen Hammerschlag ankörnen - so kann der Bohrer nicht abrutschen. Bei HSS-Bohrern mit Kreuzanschliff kann das Ankörnen entfallen. Bei großen Bohrdurchmessern mit kleinerem Bohrer vorbohren.
3. Drehzahl: Zur Schonung des Bohrers, hartes Metall bei niedriger Drehzahl und mit geringem Druck bohren. Für weichere Metalle höhere Drehzahl verwenden. Vor dem Durchbruch Druck reduzieren.
4. Kühlen: Bohrer kühlen. Bei langen Bohrungen Bohrer mehr-fach anheben und Kühlflüssigkeit zuführen, ev. Bohrpausen einlegen.
Additional information
Drilling capacity in steel (mm):
25mm
Drilling table area (mm):
350 x 335mm
Drilling table stroke (mm):
655mm
Drilling table rotatable ():
± 180°
Drilling table swivelling ():
± 45°
Speed range (UpM):
100 - 2.000UpM
Speed stages ():
16
Base plate area (lxb) (mm):
270 x 480mm
Height (total) (mm):
1.630mm
Displacement (mm):
350 x 355 x 715mm
Engine power (W):
1.100W
Mains connection (V/Hz):
400 / 50 - 60V/Hz
Pine pitch table min./max. (mm):
60 - 715mm
Pinole gap (mm):
80mm
Column diameter (mm):
80mm
Spindle reception (rotating spindle) ():
MK 3
Thread pitch (mm):
213mm
T-slots, width (mm):
16mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-14%
KBM 25 TN SET promotion consisting of:
16035
€795.29
-14%
KBM 25 S VARIO SET promotion consisting of:
16037
€1,053.49
-14%
KBM 16 SN SET promotion consisting of:
16032
€714.62
-14%
KBM 32 SN SET promotion consisting of:
16034
€1,126.09
-13%
KBM 16 T VARIO SET - promotion consisting of:
16036
€452.26
Motor 1,000 watts compl. No. 28
9808061
€326.85
-26%
Carbide insert
88353
€7.47
€10.08 MSRP
-25%
R/L switch parts (no. 9, 11, 12 2 pcs each)
9403602
€9.62
€12.82 MSRP
-19%
Gear
9807029
€280.33
€343.99 MSRP
-27%
Screw no. 1
9106173
€8.66
€11.81 MSRP
-30%
Hose package, MIG 15 - black/green
54317
€112.73
€161.00 MSRP
-29%
Rotary connection no. 31
9402221
€24.96
€35.00 MSRP
-29%
Quarz Cup (transparent) FRK-STYLE / BBW / ~14-21 l/min
59584
€23.19
€32.48 MSRP
-7%
Relay 24V/30A Type C for generators
9503452
€103.32
-10%
Treibstoffstandssensor IMRPB8 216
9503848
€230.34
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG KBM 25 SN SET promotion consisting of: 16033
16033
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- Standard features:
- Keyless chuck B 16, 1 - 16 mm
- Taper mandrel MK 3 / B 16
- Drill drift
- Tool set
- Operating instructions/CE - Set Equipment:
- Standard
equipment - Machine vice 5’ / 120 mm
- 2 clamping screws 16 mm
- HSS drill cassette 14.5 -30 mm 9 pcs.