zoom_in
zoom_out
fullscreen
-14%
ELMAG KBM 16 SN SET promotion consisting of: 16032
Sku: T-500617
€714.62 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping within 48h
Piece
doneSäulenbohrmaschinen
done1 pc. V-belt pillar drill model KBM 16 SN Art. No. 160211 Pcs. vice 5’ / 120 mm Art. No. 881432 Pcs. clamping screws
done1 pc. V-belt pillar drill model KBM 16 SN Art. No. 160211 Pcs. vice 5’ / 120 mm Art. No. 881432 Pcs. clamping screws
KBM 16 SN SET promotion consisting of: 1 pc.|Super slim professional column drill 550 W|This is how professionals drill|With a maximum quill spacing of 680 mm from the drilling bench, the KBM 16 S allows machining of tall workpieces and finished welded components. Clamping grooves in the base plate increase the clearance for high moulded parts.
The machine is therefore excellent for repairs in agriculture and for frame construction in metalworking companies. Its solid design and good standard equipment are its distinguishing features.
Clockwise/anticlockwise rotation.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
The machine is therefore excellent for repairs in agriculture and for frame construction in metalworking companies. Its solid design and good standard equipment are its distinguishing features.
Clockwise/anticlockwise rotation.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-500617
SKU manufacturer:
16032
GTIN Code (EAN):
9004853160325
Weight:
65,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Standard
equipment - quick-action drill chuck B 16, 1 - 16 mm
- taper mandrel MK 2 / B 16
- drive-out
wedge - tool set
- operating instructions / CE - Set Equipment:
- Standard
equipment - Machine vice 5’ / 120 mm
- 2 clamping screws 16 mm
- HSS drill cassette 1 - 13 mm 25 - pcs.
- TB 125 Vario - klein ganz groß, Mit einem maximalen Pinolenabstand zum Bohrtisch von 680 mm ermöglicht die KBM 16 S die Bearbeitung von hohen Werkstücken und fertig geschweißten Bauteilen. Spannnuten in der Grundplatte
erweitern den Spielraum für hohe Formteile.
Die Maschine ist daher gut für Reparaturen in der Landwirtschaft und
für den Rahmenbau in Metallbaubetrieben geeignet. Sie fällt durch eine grundsolide Ausführung und eine gute Serienausstattung auf. - 1. Bohrerauswahl: Für Metalle: Metallbohrer aus Hochleistungs-Schnellschnittstahl (HSS) verwenden. Hartmetall oder Edelstahl: Metallbohrer mit Titanbeschichtung oder aus einer Kobaltlegierung.
2. Ankörnen: Bohrstelle durch Anreißen mit einer Reißnadel markieren. Einen gehärteten Körnerstift ansetzen und Bohrstelle mit einem kurzen Hammerschlag ankörnen - so kann der Bohrer nicht abrutschen. Bei HSS-Bohrern mit Kreuzanschliff kann das Ankörnen entfallen. Bei großen Bohrdurchmessern mit kleinerem Bohrer vorbohren.
3. Drehzahl: Zur Schonung des Bohrers, hartes Metall bei niedriger Drehzahl und mit geringem Druck bohren. Für weichere Metalle höhere Drehzahl verwenden. Vor dem Durchbruch Druck reduzieren.
4. Kühlen: Bohrer kühlen. Bei langen Bohrungen Bohrer mehr-fach anheben und Kühlflüssigkeit zuführen, ev. Bohrpausen einlegen.
Additional information
Drilling capacity in steel (mm):
16mm
Drilling table area (mm):
300 x 310mm
Drilling table stroke (mm):
630mm
Drilling table rotatable ():
± 180°
Drilling table swivelling ():
± 45°
Speed range (UpM):
100 - 2.000UpM
Speed stages ():
12
Base plate area (lxb) (mm):
285 x 495mm
Height (total) (mm):
1.610mm
Displacement (mm):
300 x 310 x 680mm
Engine power (W):
550W
Mains connection (V/Hz):
400 / 50 - 60V/Hz
Pine pitch table min./max. (mm):
75 - 680mm
Pinole gap (mm):
80mm
Column diameter (mm):
73mm
Spindle reception (rotating spindle) ():
MK 2
Thread pitch (mm):
195mm
T-slots, width (mm):
16mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-14%
KBM 25 TN SET promotion consisting of:
16035
€795.29
-14%
KBM 25 S VARIO SET promotion consisting of:
16037
€1,053.49
-14%
KBM 32 SN SET promotion consisting of:
16034
€1,126.09
-13%
KBM 16 T VARIO SET - promotion consisting of:
16036
€452.26
-14%
KBM 25 SN SET promotion consisting of:
16033
€932.48
-28%
Cover for bucket (item 34)
9601278
€26.76
€37.02 MSRP
-5%
Zahnstange Nr. 5
9000238
€77.52
-26%
Housing part (no. 02)
9403035
€39.75
€53.99 MSRP
-17%
Replacement nozzle UG-1 / 70mm / 6mm
21403
€135.00
€162.98 MSRP
-8%
Magnetventil Set
9000332
€1,769.24
-24%
Nylon top container 0.5 l
32910
€14.20
€18.61 MSRP
-13%
Remote control lever
21423
€157.10
-29%
Screw connection (rotatable) ET 1/4’,
9402098
€6.18
€8.70 MSRP
-12%
Core drill HSS, 36x50mm
61874
€124.54
-43%
HSS twist drill DIN 340
70622
€19.54
€34.50 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG KBM 16 SN SET promotion consisting of: 16032
16032
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- Standard
equipment - quick-action drill chuck B 16, 1 - 16 mm
- taper mandrel MK 2 / B 16
- drive-out
wedge - tool set
- operating instructions / CE - Set Equipment:
- Standard
equipment - Machine vice 5’ / 120 mm
- 2 clamping screws 16 mm
- HSS drill cassette 1 - 13 mm 25 - pcs.