ALFRA Catalog Control Cabinet and Control Engineering Page 59
Commercial customer offer**
Show products
Top sellers from ALFRA
01326
€564.75
687,98 € MSRP
01313
€439.15
535,00 € MSRP
01291
€334.92
407,98 € MSRP
013131
€529.41
645,00 € MSRP
01325
€513.82
626,01 € MSRP
01757
€403.86
492,01 € MSRP
01305
€439.15
535,00 € MSRP
01649
€422.85
598,99 € MSRP
01289
€158.11
218,99 € MSRP
01209
€130.34
185,00 € MSRP
02001
€542.39
658,99 € MSRP
01751
€585.25
712,98 € MSRP
01482
€149.83
208,99 € MSRP
02001
€517.10
630,00 € MSRP
01422
€346.39
422,01 € MSRP
01421
€346.39
422,01 € MSRP
02003
€19.71
2002066050
€293.40
417,02 € MSRP
01739
€106.72
145,00 € MSRP
02010
€58.45
0734003
€96.93
121,00 € MSRP
1901014025
€21.47
02014
€54.66
1907012050
€21.64
1907012025
€17.56
0600001
€176.72
227,98 € MSRP
View all ALFRA products
ALFRA BUSBAR BENDING AND HOLE PUNCHING DEVICE Busbars at 120 x 12 mm (160 x 10 mm on request) can easily be bent using a universal working cylinder, and holes of Ø 6.6 up to 21.5 mm including longitudinal holes can be punched through the simple insertion of hole punchers. Bending busbars Turn switch to “bend” To bend busbars, the bending die is inserted in the hydraulic piston and the electric angle measurer is placed in the round guidance crew on the counter block. The contact cable is connected to the electric motor. The required angle is fixed on the angle scale using an adjusting screw. Since copper springs back, we recommend making a setting 1° - 3° above the required angle depending on the material thickness. You should check the first bending angle. This bending angle can be reproduced as often as required since the bending process is automatically interrupted on achieving the angle by the electrical contact switch. Technical data Bending Bending Cu max: 120 x 12 mm Bending up to: more than 90° smallest leg length: 50 mm smallest U-bend: 100 mm smallest Z-bend: 72 mm (depending on material thickness) The values stated are based on copper rails 120 x 10 mm Punching busbars Switch setting to “punch” The puncher with the neoprene scraper and the matching die are placed in the locating hole. The puncher is fixed sideways using a grub screw. Depending on the busbar width and the required hole arrangement, the processing block can be infinitely variably raised or lowered hydraulically using the handwheel. A counter attached to the handwheel shows the height of the hole centre in millimetres. We recommend centre-punching the busbar and then aligning the puncher centring point above the centre puncher to guarantee a precise hole location. The neoprene scraper and a fitted electronic sensor ensure automatic puncher retraction. Technical data Punching Punching Cu: Material thickness Cu max: Material width up to: External dimensions L x W x H: Weight: 6.6 - 21.5 mm also longitudinal hole up to max. L = 21 mm 12 mm 110 mm central 700 x 410 x 410 mm 60 kg Special version for processing of busbars up to 160 x 10 mm available on request. 59
116 Pages | Valid until 12/2024 | Previous page | Next page
Choose your language
Legal issues
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.
Please fill in all mandatory fields (underlined in red)
keyboard_arrow_down
Please fill in all mandatory fields (underlined in red)
