zoom_in
zoom_out
fullscreen
-9%
Woelm KWS 1307 gate holder for screwing on, floor mounting 130703
Sku: T-73664
42,40 € (inkl. 19% skatt, exkl. Frakt)
35,63 € (exkl. laglig moms, exkl. Frakt)
46,70 € Rekommenderat försäljningspris
I lager,klar för leverans inom 3 - 4 arbetsdagar
Bit
doneUtskjut: 106mm
doneModell: 1307.03
doneModell: 1307.03
doneMade in Germany
Malleable cast iron, black stove-enamelled, steel mounting bracket
Innehåll:
1 Bit
Frakt:
The shipping costs for Sverige could not be calculated automatically.
Leverantör:
Försäljning och leverans med ToolTeam®
Betalningsmetoder:
Returnerar:
säkerhet:
Produktdata
Tillverkare:
HELM - Woelm GmbH
Skick:
Ny
Sku:
T-73664
SKU-tillverkare:
130703
GTIN-kod (EAN):
4041518135842
Vikt:
0,00 Kg
All information om produkter från HELM - Woelm GmbH. Tekniska och optiska ändringar av tillverkaren och reserverade fel.
This page has been machine-translated, the original german version can be found here, please also note the Ansvarsfriskrivning för översättning.
Produktbeskrivning
1307..
For gates up to 100 kg
For screwing onto the floor
Function
The gate goes through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should have the greatest possible distance to the gate hinge. At the appropriate point, the bracket is fastened to the gate with a 4 mm height clearance to the stop plate of the holder so that the screw holes are under the catch hole. When locking the gate, the bracket also serves as a stop surface.
Ytterligare information
Utskjut:
106mm
Modell:
1307.03
Relaterade resultat
Kompletta kataloger
Erbjudandet riktar sig enbart till företagskunder, företag, offentliga institutioner, hantverkare och frilansare. Alla priser i kataloger är exklusive moms, fraktkostnader och tilläggsavgifter om tillämpligt.
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Matchande katalog
Kommersiell Kunderbjudande **
Produktförslag
-9%
KWS 1308 gate holder for screwing on, wall mounting
130803
42,40 €
exkl. Frakt
46,70 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 1308 gate holder for screwing on, wall mounting
130807
42,40 €
exkl. Frakt
46,70 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 1307 gate holder for screwing on, floor mounting
130707
42,40 €
exkl. Frakt
46,70 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 4221 partition wall support 100 mm, 19 mm U-support, floor rosette
422182
58,65 €
exkl. Frakt
64,59 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 5032 shell handle 100 x 100 mm, 10 mm pin part, snap ring
503266
72,89 €
exkl. Frakt
80,25 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 5061 shell handle 170 x 170 mm, 8 mm hole part, with handle
506103
89,95 €
exkl. Frakt
105,80 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 2049 door stop, wall mounting, spring-loaded
204933
133,25 €
exkl. Frakt
156,75 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 1044 door check 60 mm stroke, angular, with counter spring
104433
141,95 €
exkl. Frakt
172,85 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 4014 partition wall support 150 mm high, angled support
401432
52,55 €
exkl. Frakt
57,85 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 1082 door check 50 mm stroke, edged
108202
44,75 €
exkl. Frakt
49,25 € Rekommenderat försäljningspris
exkl. Frakt
-19%
KWS 8940 door handle Ø 40 mm, L 400 mm
894070
289,60 €
exkl. Frakt
359,05 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 5002 shell handle 70 x 200 mm, 8 mm pin part, snap ring
500210
51,35 €
exkl. Frakt
56,55 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 2093 door buffer Ø 50 mm, black rubber ring
209382
37,95 €
exkl. Frakt
41,75 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 4264 partition wall support 150 mm high, 30 mm support
426432
38,30 €
exkl. Frakt
42,19 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 7274 pipe bend 180°, r=200 mm, with inside/outside bores
727483
205,45 €
exkl. Frakt
250,20 € Rekommenderat försäljningspris
exkl. Frakt
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 1307 gate holder for screwing on, floor mounting 130703
Screw on
up to 100 kg
floor mounting
stove-enamelled
catch hook
bracket
Made in Germany
black
steel
stone oarlock
malleable iron
gate holder
1307..
For gates up to 100 kg
For screwing onto the floor
Function
The gate goes through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should have the greatest possible distance to the gate hinge. At the appropriate point, the bracket is fastened to the gate with a 4 mm height clearance to the stop plate of the holder so that the screw holes are under the catch hole. When locking the gate, the bracket also serves as a stop surface. T-73664 130703 4041518135842 sv ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/sv-SE/woelm-kws-1307-gate-holder-for-screwing-on-floor-mounting-130703-t-73664-4041518135842?dc=SE&cu=EUR 2026-08-04 42.4 Sverige SE DE 14
1307..
For gates up to 100 kg
For screwing onto the floor
Function
The gate goes through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should have the greatest possible distance to the gate hinge. At the appropriate point, the bracket is fastened to the gate with a 4 mm height clearance to the stop plate of the holder so that the screw holes are under the catch hole. When locking the gate, the bracket also serves as a stop surface. T-73664 130703 4041518135842 sv ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/sv-SE/woelm-kws-1307-gate-holder-for-screwing-on-floor-mounting-130703-t-73664-4041518135842?dc=SE&cu=EUR 2026-08-04 42.4 Sverige SE DE 14