zoom_in
zoom_out
fullscreen
-9%
Woelm KWS 1308 gate holder for screwing on, wall mounting 130807
Sku: T-681940
42,40 € (inkl. 19% skatt, exkl. Frakt)
35,63 € (exkl. laglig moms, exkl. Frakt)
46,70 € Rekommenderat försäljningspris
I lager,klar för leverans inom 3 - 4 arbetsdagar
Bit
doneMade in Germany
Hot-dip galvanized malleable iron, steel mounting bracket
Innehåll:
1 Bit
Frakt:
The shipping costs for Sverige could not be calculated automatically.
Leverantör:
Försäljning och leverans med ToolTeam®
Betalningsmetoder:
Returnerar:
säkerhet:
Produktdata
Tillverkare:
HELM - Woelm GmbH
Skick:
Ny
Sku:
T-681940
SKU-tillverkare:
130807
GTIN-kod (EAN):
4041518135873
Vikt:
0,00 Kg
All information om produkter från HELM - Woelm GmbH. Tekniska och optiska ändringar av tillverkaren och reserverade fel.
This page has been machine-translated, the original german version can be found here, please also note the Ansvarsfriskrivning för översättning.
Produktbeskrivning
1308..
For gates up to 100 kg
For screwing to the wall
Function
The gate will go through Automatically locked when pressed against the locking device. A light pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the wall at the desired locking point, which should have the greatest possible distance to the gate hinge. At the appropriate point, the bracket is fastened to the gate with a 4 mm height clearance to the stop plate of the holder so that the screw holes are under the catch hole. When locking the gate, the bracket also serves as a stop surface.
Relaterade resultat
Kompletta kataloger
Erbjudandet riktar sig enbart till företagskunder, företag, offentliga institutioner, hantverkare och frilansare. Alla priser i kataloger är exklusive moms, fraktkostnader och tilläggsavgifter om tillämpligt.
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Matchande katalog
Kommersiell Kunderbjudande **
Produktförslag
-7%
KWS 1302 gate holder with stone bolt for walling in, wall
130203
28,10 €
exkl. Frakt
30,25 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 1305 gate holder with stone oarlock for walling in, floor
130507
37,80 €
exkl. Frakt
41,65 € Rekommenderat försäljningspris
exkl. Frakt
-7%
KWS 1302 gate holder with stone bolt for walling in, wall
130207
28,10 €
exkl. Frakt
30,25 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 1308 gate holder for screwing on, wall mounting
130803
42,40 €
exkl. Frakt
46,70 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 1305 gate holder with stone oarlock for walling in, floor
130503
37,80 €
exkl. Frakt
41,65 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 2074 door buffer 60 mm wall clearance, Ø 30 mm, with rosette
207462
38,19 €
exkl. Frakt
42,05 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 1044 door check 60 mm stroke, angular, with counter spring
104433
141,95 €
exkl. Frakt
172,85 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 5041 shell handle Ø 110 mm, 10 mm pin section, snap ring
504103
39,79 €
exkl. Frakt
43,80 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 2049 door stop, wall mounting, spring-loaded
204933
133,25 €
exkl. Frakt
156,75 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 5038 shell handle Ø 110 mm, 9 mm pin section, snap ring
503803
39,79 €
exkl. Frakt
43,80 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 7274 pipe bend 180°, r=200 mm, with inside/outside bores
727483
205,45 €
exkl. Frakt
250,20 € Rekommenderat försäljningspris
exkl. Frakt
-19%
KWS 8940 door handle Ø 40 mm, L 400 mm
894070
289,60 €
exkl. Frakt
359,05 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 8169 door handle Ø35 mm, GL from 200 mm, variable support
816923
240,05 €
exkl. Frakt
292,35 € Rekommenderat försäljningspris
exkl. Frakt
KWS 5303 handle 140 mm, lightweight design, rounded
530302
7,75 €
exkl. Frakt
exkl. Frakt
-9%
KWS 4014 partition wall support 150 mm high, angled support
401432
52,55 €
exkl. Frakt
57,85 € Rekommenderat försäljningspris
exkl. Frakt
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 1308 gate holder for screwing on, wall mounting 130807
Screw on
up to 100 kg
catch hook
hot-dip galvanised
mounting bracket
Made in Germany
steel
malleable iron
gate holder
wall mounting
1308..
For gates up to 100 kg
For screwing to the wall
Function
The gate will go through Automatically locked when pressed against the locking device. A light pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the wall at the desired locking point, which should have the greatest possible distance to the gate hinge. At the appropriate point, the bracket is fastened to the gate with a 4 mm height clearance to the stop plate of the holder so that the screw holes are under the catch hole. When locking the gate, the bracket also serves as a stop surface. T-681940 130807 4041518135873 sv ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/sv-SE/woelm-kws-1308-gate-holder-for-screwing-on-wall-mounting-130807-t-681940-4041518135873?dc=SE&cu=EUR 2026-08-05 42.4 Sverige SE DE 14
1308..
For gates up to 100 kg
For screwing to the wall
Function
The gate will go through Automatically locked when pressed against the locking device. A light pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the wall at the desired locking point, which should have the greatest possible distance to the gate hinge. At the appropriate point, the bracket is fastened to the gate with a 4 mm height clearance to the stop plate of the holder so that the screw holes are under the catch hole. When locking the gate, the bracket also serves as a stop surface. T-681940 130807 4041518135873 sv ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/sv-SE/woelm-kws-1308-gate-holder-for-screwing-on-wall-mounting-130807-t-681940-4041518135873?dc=SE&cu=EUR 2026-08-05 42.4 Sverige SE DE 14