Rothoblaas - X-RAD Sida 34
Kommersiell Kunderbjudande **Toppförsäljare från RothoBlaas Deutschland
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
X-ONE X-PLATE X-SEAL GUIDELINES FOR MODELLING THE XRAD SYSTEM STEP 1 STEP 2 Modelling starts with the definition of the base panel and the X-ONE connectors at the corners. The CLT panel can be modelled with “shell” elements as the rigidity of the CLT / X-RAD system is controlled by the deformability of the connection. The connector can be modelled with two square steel connecting rods with side measuring l = 5.51 mm and length 255 mm (“frame” elements placed at the corners of the panel). So a final X-RAD rigidity is obtained of k = 25 kN/mm. 255 mm 255 mm 25 kN/mm 25 kN/mm STEP 3 STEP 4 The representation of each X-RAD with two connecting rods allows a traction/compression force to be linked to the vertical frame element and a shearing force to the horizontal frame element. In order to simulate contact between panel-panel and panelfoundation, nonlinear gap springs are defined. These have infinite compression rigidity and no traction. SHEAR TENSION COMPRESSION C C NOTE: The full guidelines for modelling the X-RAD system can be downloaded from www.rothoblaas.com or from the MyProject software. These guidelines give an example of a possible sequence of useful tips to help you model CLT structures with the X-RAD system. It is the responsibility of the designer to define and study in depth the modelling process details needed for proper structural design. 32 X-ONE
84 Sidor | Gäller till 04/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
