Ganter Norm Standard Parts - Catalogue Sida 1645
Kommersiell Kunderbjudande **Toppförsäljare från Ganter Norm
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Universal Joints with Friction Bearing, Type EG Determining the Size The graph shows the transferable performance N and the torques M of universal joints DIN 808, type EG (single jointed, friction bearing) in relation to the RPM n. The values are applicable to a steady RPM, a steady load and an inclination angle of max. 10°. They are not applicable to stainless steel universal joints. For larger inclination angles ß, a nominal performance N increased by the correction coefficient k and/or a nominal torque M has to be selected (see example below). Conversion formulae: Torque M [Nm] Performance N [kW] = 1 kW = 1.36 PS N [kW] = 9550 n [min-1] M [Nm] x n [min-1] 9550 1 PS = 0.736 kW Example 1 Performance N to be transferred RPM n Inclination angle ß = 0.65 kW = 230 min -1 = 10° Correction coefficient k =1 Indicative performance N = Nominal performance N Intersection point P results from 0.65 kW and 230 min-1 (which corresponds to a torque of 27 Nm). The next larger universal joint corresponding to point P is the model with a diameter d1 = 25 mm. Example 2 Torque M to be transferred RPM n Inclination angle ß = 27 Nm = 230 min-1 = 30° Correction coefficient k = 2.25 Indicative torque M = 2.25 x 27 Nm = 60 Nm Intersection point P1 results from 61 Nm and 230 min-1 (which corresponds to an indicative performance N = 1.47 kW). The next larger universal joint corresponding to point P1 is the model with a diameter d1 = 36 mm. Page 1644 | 3.6 Moving, Transferring, Connecting with Shafts and Joints
2210 Sidor | Gäller till 12/2026 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
