Dynabrade - Industrial Katalog Sida 111
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Cut-Off Wheel Tools DYNASWIVEL® PAGE 234 COUPLER/PLUG Air-Powered Cutting Tools, 4" Diameter PAGE 239 FOR TYPE 41 REINFORCED CUT-OFF WHEELS For Efficient Cutting of Sheet Metal, Frame Rails, Clamps, Bolts, etc. 4" (102 mm) diameter SEE PAGE 289 4" Diameter, 7º Offset, .7 hp, Front Exhaust • Each model accepts optional 4" diameter reinforced Type 41 Cut-Off Wheels with 3/8" center hole. (Wheel width of 1/32" - 1/8".) • Gearless motor design for reduced maintenance and downtime. • Tool handle is offset 7º for greater operator comfort. • Safety-lock lever is included; rear exhaust. Model 52430 Model 52431 15,000 RPM 20,000 RPM Model 52430 Dynaswivel® air line connector is ideal for use with most air tools. It improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 234.) Wheel Sold Separately 4" Diameter, Straight Line, 1 hp, Rear Exhaust Model 52573 GRINDERS • Each model accepts optional 4" diameter reinforced Type 41 Cut-Off Wheels with 3/8" center hole. (Wheel width of 1/32" - 1/8".) • Governor controlled motor to maintain RPM under heavy load. • Safety-lock lever is included. Model 52573 Model 52574 15,000 RPM 18,000 RPM Wheel Sold Separately 4" Diameter, Straight Line, 1 hp, 6" Extension • Each model accepts optional 4" diameter reinforced Type 41 Cut-Off Wheels with 3/8" center hole. (Wheel width of 1/32" - 1/8".) Model 52580 • Governor controlled motor to maintain RPM under heavy load. • Safety-lock lever is included; rear exhaust. Model 52579 15,000 RPM Always use required wheel guard. Never remove a guard that is specified for a tool. Model 52580 18,000 RPM Wheel Sold Separately IMPORTANT: Speed of tool must not exceed maximum operating speed of accessory. Never mount non-reinforced grinding wheels. Always wear eye, face & body protection. Model Number Motor hp (W) Motor RPM Sound Level Maximum Air Flow SCFM (L/Min) Hose I.D. Size Inch (mm) Air Inlet Thread Tool Thread Weight Pound (kg) Length Inch (mm) Height Inch (mm) 52430 0.7 (522) 15,000 52431 0.7 (522) 20,000 89 dB(A) 32 (906) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.7 (1.2) 7-3/8 (187) 4-3/4 (121) 88 dB(A) 36 (1,020) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.7 (1.2) 7-3/8 (187) 52573 1 (744) 4-3/4 (121) 15,000 77 dB(A) 39 (1,104) 3/8 (10) 3/8" NPT 3/8"-24 Male 2.5 (1.1) 9-3/8 (238) 52574 4-1/2 (113) 1 (744) 18,000 78 dB(A) 40 (1,133) 3/8 (10) 3/8" NPT 3/8"-24 Male 2.5 (1.1) 9-3/8 (238) 4-1/2 (113) 52579 1 (744) 15,000 77 dB(A) 39 (1,104) 3/8 (10) 3/8" NPT 3/8"-24 Male 4.1 (1.8) 14-7/8 (379) 4-1/2 (113) 52580 1 (744) 18,000 78 dB(A) 40 (1,133) 3/8 (10) 3/8" NPT 3/8"-24 Male 4.1 (1.8) 14-7/8 (379) 4-1/2 (113) Tune-Up Kit: .7 hp models – No. 96045; 1 hp models – No. 96532 • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar) 111
316 Sidor | Gäller till 07/2026 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.