Dynabrade - Industrial Katalog Sida 110
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Cut-Off Wheel Tools DYNASWIVEL® PAGE 234 COUPLER/PLUG Air-Powered Cutting Tools, 3" and 4" Diameter PAGE 239 FOR TYPE 41 REINFORCED CUT-OFF WHEELS For Efficient Cutting of Sheet Metal, Frame Rails, Clamps, Bolts, etc. 3" and 4" Dia. (76 mm and 102 mm) SEE PAGE 289 • Models accepts optional 3" or 4" diameter Type 41 reinforced Cut-Off Wheels, with 3/8" center hole. • “Dual-wick” lubrication system saturates gears with oil for increased performance, extended life and reduced downtime. • Adjustable wheel guard provides maximum operator protection. • Safety-lock lever is included. Composite Housing Models Model 54730 Right Angle, .7 hp, Rear Exhaust Wheel Sold Separately • Models include aluminum right angle housing. 3-3/8" Model 54730 3" Dia., 18,000 RPM Model 54734 4" Dia., 13,500 RPM • Each model includes side handle for left or right-hand use. Extended Model 54736 GRINDERS Model 54732 3" Dia., Extended, 18,000 RPM Model 54736 4" Dia., Extended, 13,500 RPM Wheel Sold Separately • Extension design allows longer reach on work piece, and two-hand control for added comfort. All models on page include 95848 Gear Oil and 95541 Gear Oil Gun. Simple lubrication extends gear life. Steel Housing Models Right Angle, .7 hp, Rear Exhaust • Steel housings offer increased durability! • Models include steel right angle housing. Model 54744 Model 54740 3" Dia., 18,000 RPM Model 54744 4" Dia., 13,500 RPM 3-3/8" Wheel Sold Separately • Each model includes side handle for left or right-hand use. Model 54742 3" Dia., Extended, 18,000 RPM Model 54746 4" Dia., Extended, 13,500 RPM Extended Model 54742 • Extension design allows longer reach on work piece, and two-hand control for added comfort. Wheel Sold Separately IMPORTANT: Speed of tool must not exceed maximum operating speed of accessory. Never mount non-reinforced grinding wheels. Always wear eye, face & body protection. Model Number Motor hp (W) Motor RPM Sound Level Maximum Air Flow SCFM (L/Min) Hose I.D. Size Inch (mm) Air Inlet Thread Tool Thread 54730 0.7 (522) 18,000 83 dB(A) 41 (1,161) 3/8 (10) 1/4" NPT 3/8"-24 Male 54732 0.7 (522) 18,000 82 dB(A) 41 (1,161) 3/8 (10) 1/4" NPT 3/8"-24 Male 54734 0.7 (522) 13,500 83 dB(A) 40 (1,133) 3/8 (10) 1/4" NPT 3/8"-24 Male 54736 0.7 (522) 13,500 83 dB(A) 40 (1,133) 3/8 (10) 1/4" NPT 54740 0.7 (522) 18,000 82 dB(A) 41 (1,161) 3/8 (10) 1/4" NPT 54742 0.7 (522) 18,000 79 dB(A) 41 (1,161) 3/8 (10) 54744 0.7 (522) 13,500 81 dB(A) 40 (1,133) 54746 0.7 (522) 13,500 81 dB(A) 40 (1,133) Length Inch (mm) Height Inch (mm) 3 (1.3) 8 (202) 3-1/8 (79) 3.5 (1.6) 11-3/8 (288) 3-1/8 (79) 3.2 (1.4) 8 (202) 3-1/16 (78) 3/8"-24 Male 3.7 (1.7) 11-3/8 (288) 3-1/16 (78) 3/8"-24 Male 3.8 (1.7) 8-1/16 (204) 3-1/8 (79) 1/4" NPT 3/8"-24 Male 4.2 (1.9) 11-7/16 (290) 3-1/8 (79) 3/8 (10) 1/4" NPT 3/8"-24 Male 4 (1.8) 8-1/16 (204) 3-1/16 (78) 3/8 (10) 1/4" NPT 3/8"-24 Male 4.4 (2) 11-7/16 (290) 3-1/16 (78) Tune-Up Kit: Composite – No. 96680; Steel – No. 98623 • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar) 110 Weight Pound (kg)
316 Sidor | Gäller till 07/2026 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.