BLICKLE - wheels and castors Sida 46
Kommersiell Kunderbjudande **Toppförsäljare från Blickle
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Wheels and castors guide Load capacity Dynamic load capacity The load capacity listed for a wheel or castor is the load capacity which that wheel or castor was capable of withstanding when tested on a rotating bench in accordance with DIN EN 12527–12533 (ISO 22878–22884). In order to determine the load capacity that a wheel or castor needs to have, it is important to know the dead weight of the transport equipment, the maximum additional weight and the number of supporting wheels or castors. When using four or more wheels or castors, the load on each individual wheel or castor may vary. The necessary load capacity is calculated as follows: T = E+Z x S n T= E= Z= n= S= Wheels and castors with ball bearings are capable of exceeding speeds of 4 km/h with a reduced load capacity. required load capacity per wheel or castor dead weight of the transport equipment maximum additional weight number of supporting wheels or castors safety factor Recommended safety factors for different applications The safety factor S is used to account for deviations from the standard application conditions (smooth surface, walking speed of 4 km/h, equal load distribution, travelling straight, ambient temperature of between 15 °C and 28 °C). The safety factor is affected by the speed of movement and the ratio of wheel Ø to the height of the obstacle. There are four different categories (see table). Determining safety factor S Transport Environment Height of the Safety factor obstacle Safety factors do not take tread wear into consideration. manual indoors < 5 % of wheel Ø 1.0–1.5 manual outdoors > 5 % of wheel Ø 1.5–2.2 motorized indoors < 5 % of wheel Ø 1.4–2.0 motorized outdoors > 5 % of wheel Ø 2.0–3.0 Static load capacity If a wheel or castor is exposed to mainly static loads, its static load capacity is tested in accordance with ISO 22878. One of the criteria that this test looks at is the extent to which the tread flattens after a specific period. 46 Information about the static load capacity of our products is available in our product data sheets. You can contact us directly to request them or download them from www.blickle.com. we innovate mobility www.blickle.com
636 Sidor | Gäller till 12/2023 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.