BLICKLE - wheels and castors Sida 45
Kommersiell Kunderbjudande **Toppförsäljare från Blickle
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Wheels and castors guide Classification of wheels and castors International standards divide wheels and castors into the following categories: • light-duty wheels and castors • wheels and castors for transport equipment • heavy-duty wheels and castors Each of these are used for different applications and are subject to different test conditions. Blickle light-duty wheels and castors as well as compact castors Light-duty wheels and castors and compact castors are normally used indoors. They are designed to handle speeds of up to 3 km/h. They have a load capacity of up to 280 kg (light-duty wheels and castors) or 1,750 kg (compact castors). They maximise manoeuvrability and smooth rolling performance while reducing rolling resistance. They are typically used for medical equipment, display stands, industrial kitchen equipment and similar applications. The load capacity of Blickle light-duty wheels and castors and compact castors is tested on a rotating bench in accordance with DIN EN 12530 / ISO 22881 The main test conditions: • speed: 3 km/h • temperature: +15 °C to +28 °C • hard, horizontal surface with obstacles with a height equal to 3 % of the wheel diameter • test duration: the number of times that obstacles are crossed is equivalent to ten times the wheel diameter (in millimeters) • rest time: max. 3 minutes after 3 minutes running time Blickle wheels and castors for transport equipment as well as guide rollers Wheels and castors for transport equipment as well as guide rollers are used for indoor and outdoor industrial applications. They are designed to handle speeds of up to 4 km/h. They have a load capacity of up to 1,000 kg. Wheels and castors for transport equipment are resistant to environmental factors, largely maintenance-free and capable of functioning properly for long periods. They are typically used for machinery and equipment of all kinds, in addition to pallets, scaffolding, waste containers and the like. Blickle heavy-duty wheels and castors Heavy-duty wheels and castors are used to handle heavy loads and / or high speeds. They are particularly strong in their design. Castors with two wheels (twin wheel castors) are also used in this area to handle particularly heavy loads. Spring-loaded castors are particularly suitable when there is a need to avoid vibration during transport. They are typically used on forklift trucks and industrial trucks, assembly and transport systems and similar equipment. The load capacity of Blickle wheels and castors for transport equipment as well as for guide rollers is tested on a rotating bench in accordance with DIN EN 12532 / ISO 22883. The load capacity of Blickle heavy-duty wheels and castors is tested on a rotating bench at a speed of 4 km/h in accordance with DIN EN 12532 / ISO 22883. Wheels and castors designed for higher speeds are tested for load capacity in accordance with DIN EN 12533 / ISO 22884. The main test conditions: • speed: 4 km/h • temperature: +15 °C to +28 °C • hard, horizontal surface with obstacles at the following height: 5 % of wheel diameter for wheels with soft tread (hardness < 90 Shore A) 2.5 % of wheel diameter for wheels with hard tread (hardness ≥ 90 Shore A) • test duration: 15,000 revolutions with a minimum of 500 crossing obstacles • rest time: max. 1 minute after 3 minutes running time The main test conditions according to DIN EN 12532 / ISO 22883: • speed: 4 km/h • temperature: +15 °C to +28 °C • hard, horizontal surface with obstacles at the following height: 5 % of wheel diameter for wheels with soft tread (hardness < 90 Shore A) 2.5 % of wheel diameter for wheels with hard tread (hardness ≥ 90 Shore A) • test duration: 15,000 revolutions with a minimum of 500 crossing obstacles • rest time: max. 1 minute after 3 minutes running time The main test conditions according to DIN EN 12533 / ISO 22884: • speed: 6 km/h, 10 km/h, 16 km/h, 25 km/h (standard: max. 16 km/h) • temperature: +15 °C to +28 °C • hard, horizontal surface with obstacles at the following height: 5 % of wheel diameter for wheels with soft tread (hardness < 90 Shore A) 2.5 % of wheel diameter for wheels with hard tread (hardness ≥ 90 Shore A) • test duration: the number of times that obstacles are crossed is equal to five times the wheel diameter (in millimeters) • rest time: max. 1 minute after 3 minutes running time www.blickle.com we innovate mobility 45
636 Sidor | Gäller till 12/2023 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.