zoom_in
zoom_out
fullscreen
-9%
Woelm KWS 1311 Screw-on gate holder, floor mounting 131103
SKU: T-681942
53,25 € (w tym podatek 19%, wył. Wysyłkę)
44,75 € (wył. VAT prawny, wył. Wysyłkę)
58,60 € Sugerowana cena producenta
W magazynie,gotowe do wysyłki w 3 - 4 dni roboczych
Sztuka
doneMade in Germany
Black stove-enamelled steel
Treść:
1 Sztuka
Wysyłka:
The shipping costs for Polska could not be calculated automatically.
Dostawca:
Sprzedaż i dostawa przez ToolTeam®
Metody Płatności:
Zwroty:
Bezpieczeństwo:
Dane produktu
Producent:
HELM - Woelm GmbH
Stan:
Nowy
SKU:
T-681942
Producent SKU:
131103
Kod GTIN (EAN):
4041518135897
Waga:
0,00 Kg
Wszystkie informacje dotyczące produktów od HELM - Woelm GmbH. Zmiany techniczne i optyczne producenta oraz błędy zastrzeżone.
This page has been machine-translated, the original german version can be found here, please also note the Zastrzeżenie dotyczące tłumaczeń.
Opis produktu
1311..
For gates up to 100 kg
For screwing onto the floor
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should be as far as possible from the gate hinge, using screws and dowels. At the appropriate point, the bracket is attached to the gate with three screws. The holder can be converted from floor to wall mounting by unscrewing the axle and moving the catch hook.
Powiązane wyniki
Kompletne katalogi
Oferta skierowana jest wyłącznie do klientów biznesowych, firm, instytucji publicznych, handlowców i freelancerów. Wszystkie ceny w katalogach nie zawierają podatku VAT, kosztów wysyłki i ewentualnych dopłat.
Producent ponosi wyłączną odpowiedzialność za treść, cenę i szczegóły dotyczące produktów i ofert prezentowanych w katalogach. Z zastrzeżeniem zmian technicznych i optycznych przez producenta oraz błędów.
Producent ponosi wyłączną odpowiedzialność za treść, cenę i szczegóły dotyczące produktów i ofert prezentowanych w katalogach. Z zastrzeżeniem zmian technicznych i optycznych przez producenta oraz błędów.
Pasujący katalog
Oferta dla klientów komercyjnych**
Propozycje produktów
-15%
KWS 1315 gate holder for walling in, floor mounting
131507
115,70 €
wył. Wysyłkę
136,10 € Sugerowana cena producenta
wył. Wysyłkę
-15%
KWS 1315 gate holder for walling in, floor mounting
131503
115,70 €
wył. Wysyłkę
136,10 € Sugerowana cena producenta
wył. Wysyłkę
-9%
KWS 1311 Screw-on gate holder, floor mounting
131102
53,25 €
wył. Wysyłkę
58,60 € Sugerowana cena producenta
wył. Wysyłkę
-15%
KWS 1311 Screw-on gate holder, floor mounting
131182
88,19 €
wył. Wysyłkę
103,75 € Sugerowana cena producenta
wył. Wysyłkę
-9%
HELM 981 S Galvanized steel roller, yellow, up to 250 kg
098111
42,70 €
wył. Wysyłkę
47,05 € Sugerowana cena producenta
wył. Wysyłkę
-18%
KWS 7301 pipe bend 90° double bend, with side holes
730183
136,85 €
wył. Wysyłkę
166,65 € Sugerowana cena producenta
wył. Wysyłkę
-9%
KWS 8640 profile support 135 x 150 x 25 mm, angled support
864070
41,29 €
wył. Wysyłkę
45,45 € Sugerowana cena producenta
wył. Wysyłkę
KWS 2003 door buffer floor mounting, screwable, with pin
200333
17,15 €
wył. Wysyłkę
wył. Wysyłkę
-9%
KWS 2093 door buffer Ø 50 mm, black rubber ring
209382
37,95 €
wył. Wysyłkę
41,75 € Sugerowana cena producenta
wył. Wysyłkę
-19%
KWS 2024 screw-on door stop, spring-loaded
202482
271,69 €
wył. Wysyłkę
336,80 € Sugerowana cena producenta
wył. Wysyłkę
-18%
KWS 3F13 change set handle with button 3G10, round rosette
3F1383
192,15 €
wył. Wysyłkę
234,05 € Sugerowana cena producenta
wył. Wysyłkę
-18%
KWS 7273 pipe bend 180°, r=200 mm, with internal bores
727382
205,45 €
wył. Wysyłkę
250,20 € Sugerowana cena producenta
wył. Wysyłkę
-9%
KWS 4264 partition wall support 150 mm high, 30 mm support
426432
38,30 €
wył. Wysyłkę
42,19 € Sugerowana cena producenta
wył. Wysyłkę
-15%
KWS 5160 shell handle 145 x 165 mm, 8 mm hole part, snap ring
516002
89,95 €
wył. Wysyłkę
105,80 € Sugerowana cena producenta
wył. Wysyłkę
-19%
HELM GT-L 80 set stainless steel effect, damper, 2500 mm, ceiling
0057682
507,95 €
wył. Wysyłkę
629,70 € Sugerowana cena producenta
wył. Wysyłkę
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 1311 Screw-on gate holder, floor mounting 131103
Screw on
up to 100 kg
floor mounting
stove-enamelled
catch hook
Made in Germany
black
steel
gate holder
1311..
For gates up to 100 kg
For screwing onto the floor
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should be as far as possible from the gate hinge, using screws and dowels. At the appropriate point, the bracket is attached to the gate with three screws. The holder can be converted from floor to wall mounting by unscrewing the axle and moving the catch hook. T-681942 131103 4041518135897 pl ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/pl-PL/woelm-kws-1311-screw-on-gate-holder-floor-mounting-131103-t-681942-4041518135897?dc=PL&cu=EUR 2026-08-29 53.25 Polska PL DE 14
1311..
For gates up to 100 kg
For screwing onto the floor
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should be as far as possible from the gate hinge, using screws and dowels. At the appropriate point, the bracket is attached to the gate with three screws. The holder can be converted from floor to wall mounting by unscrewing the axle and moving the catch hook. T-681942 131103 4041518135897 pl ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/pl-PL/woelm-kws-1311-screw-on-gate-holder-floor-mounting-131103-t-681942-4041518135897?dc=PL&cu=EUR 2026-08-29 53.25 Polska PL DE 14