zoom_in
zoom_out
fullscreen
-9%
Woelm KWS 1311 Screw-on gate holder, floor mounting 131102
SKU: T-681941
53,25 € (w tym podatek 19%, wył. Wysyłkę)
44,75 € (wył. VAT prawny, wył. Wysyłkę)
58,60 € Sugerowana cena producenta
W magazynie,gotowe do wysyłki w 3 - 4 dni roboczych
Sztuka
doneMade in Germany
Steel stove-enamelled in silver
Treść:
1 Sztuka
Wysyłka:
The shipping costs for Polska could not be calculated automatically.
Dostawca:
Sprzedaż i dostawa przez ToolTeam®
Metody Płatności:
Zwroty:
Bezpieczeństwo:
Dane produktu
Producent:
HELM - Woelm GmbH
Stan:
Nowy
SKU:
T-681941
Producent SKU:
131102
Kod GTIN (EAN):
4041518135880
Waga:
0,00 Kg
Wszystkie informacje dotyczące produktów od HELM - Woelm GmbH. Zmiany techniczne i optyczne producenta oraz błędy zastrzeżone.
This page has been machine-translated, the original german version can be found here, please also note the Zastrzeżenie dotyczące tłumaczeń.
Opis produktu
1311..
For gates up to 100 kg
For screwing onto the floor
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should be as far as possible from the gate hinge, using screws and dowels. At the appropriate point, the bracket is attached to the gate with three screws. The holder can be converted from floor to wall mounting by unscrewing the axle and moving the catch hook.
Powiązane wyniki
Kompletne katalogi
Oferta skierowana jest wyłącznie do klientów biznesowych, firm, instytucji publicznych, handlowców i freelancerów. Wszystkie ceny w katalogach nie zawierają podatku VAT, kosztów wysyłki i ewentualnych dopłat.
Producent ponosi wyłączną odpowiedzialność za treść, cenę i szczegóły dotyczące produktów i ofert prezentowanych w katalogach. Z zastrzeżeniem zmian technicznych i optycznych przez producenta oraz błędów.
Producent ponosi wyłączną odpowiedzialność za treść, cenę i szczegóły dotyczące produktów i ofert prezentowanych w katalogach. Z zastrzeżeniem zmian technicznych i optycznych przez producenta oraz błędów.
Pasujący katalog
Oferta dla klientów komercyjnych**
Propozycje produktów
-15%
KWS 1315 gate holder for walling in, floor mounting
131507
115,70 €
wył. Wysyłkę
136,10 € Sugerowana cena producenta
wył. Wysyłkę
-15%
KWS 1315 gate holder for walling in, floor mounting
131503
115,70 €
wył. Wysyłkę
136,10 € Sugerowana cena producenta
wył. Wysyłkę
-9%
KWS 1311 Screw-on gate holder, floor mounting
131103
53,25 €
wył. Wysyłkę
58,60 € Sugerowana cena producenta
wył. Wysyłkę
-15%
KWS 1311 Screw-on gate holder, floor mounting
131182
88,19 €
wył. Wysyłkę
103,75 € Sugerowana cena producenta
wył. Wysyłkę
-15%
KWS 5062 shell handle 170 x 170 mm, 8 mm pin part, with pusher
506210
100,95 €
wył. Wysyłkę
118,75 € Sugerowana cena producenta
wył. Wysyłkę
-9%
KWS 2093 door buffer Ø 50 mm, black rubber ring
209382
37,95 €
wył. Wysyłkę
41,75 € Sugerowana cena producenta
wył. Wysyłkę
-9%
KWS 2066 door buffer 120 mm wall clearance, Ø 30 mm, spring-loaded
206670
59,19 €
wył. Wysyłkę
65,15 € Sugerowana cena producenta
wył. Wysyłkę
KWS 5303 handle 140 mm, lightweight design, rounded
530302
7,75 €
wył. Wysyłkę
wył. Wysyłkę
-9%
KWS 5002 shell handle 70 x 200 mm, 8 mm pin part, snap ring
500210
51,35 €
wył. Wysyłkę
56,55 € Sugerowana cena producenta
wył. Wysyłkę
-15%
KWS 5061 shell handle 170 x 170 mm, 8 mm hole part, with handle
506103
89,95 €
wył. Wysyłkę
105,80 € Sugerowana cena producenta
wył. Wysyłkę
KWS 8604 profile support 110 x 90 x 50 mm, sloping support
860422
18,79 €
wył. Wysyłkę
wył. Wysyłkę
-19%
HELM GT-L 80 set stainless steel effect, damper, 2500 mm, ceiling
0057682
507,95 €
wył. Wysyłkę
629,70 € Sugerowana cena producenta
wył. Wysyłkę
-18%
KWS 7273 pipe bend 180°, r=200 mm, with internal bores
727383
205,45 €
wył. Wysyłkę
250,20 € Sugerowana cena producenta
wył. Wysyłkę
-19%
KWS 8940 door handle Ø 40 mm, L 400 mm
894070
289,60 €
wył. Wysyłkę
359,05 € Sugerowana cena producenta
wył. Wysyłkę
-19%
KWS 8221 door handle Ø 30 mm, GL 200 - 1600 mm
822161
364,25 €
wył. Wysyłkę
451,55 € Sugerowana cena producenta
wył. Wysyłkę
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 1311 Screw-on gate holder, floor mounting 131102
Screw on
up to 100 kg
floor mounting
stove-enamelled
catch hook
Made in Germany
silver-colored
steel
gate holder
1311..
For gates up to 100 kg
For screwing onto the floor
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should be as far as possible from the gate hinge, using screws and dowels. At the appropriate point, the bracket is attached to the gate with three screws. The holder can be converted from floor to wall mounting by unscrewing the axle and moving the catch hook. T-681941 131102 4041518135880 pl ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/pl-PL/woelm-kws-1311-screw-on-gate-holder-floor-mounting-131102-t-681941-4041518135880?dc=PL&cu=EUR 2026-07-20 53.25 Polska PL DE 14
1311..
For gates up to 100 kg
For screwing onto the floor
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should be as far as possible from the gate hinge, using screws and dowels. At the appropriate point, the bracket is attached to the gate with three screws. The holder can be converted from floor to wall mounting by unscrewing the axle and moving the catch hook. T-681941 131102 4041518135880 pl ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/pl-PL/woelm-kws-1311-screw-on-gate-holder-floor-mounting-131102-t-681941-4041518135880?dc=PL&cu=EUR 2026-07-20 53.25 Polska PL DE 14