Rothoblaas - X-RAD Pagina 36
Commercieel klantenaanbod**Beste verkopers van RothoBlaas Deutschland
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
X-ONE X-PLATE X-SEAL MANUAL INSTALLATION For use of X-ONE not in series and for applications which do not provide for the use of the manual or automatic template, it is possible to install X-ONE manually. 1. place X-ONE on the corner surface of the panel 2. fix X-ONE temporarily to the CLT panel using 2 HBS5120 screws in order to prevent movement of the component during the definitive fastening operations 3. proceed to the definitive fastening of X-ONE with 6 XVGS11350 connectors At the end of the definitive fastening, the positioning screws can be removed 1 2 3 INSTALLATION WITH MANUAL AND AUTOMATIC TEMPLATE MANUAL TEMPLATE The manual template system enables X-ONE to be positioned quickly and precisely. IT can be used for thicknesses between 100 and 220 mm. The steps are the following: 1. bring the template close to the corner of the panel so as to bring the template against the oblique side. Fasten the template to the panel with the screws already installed in the template body. 2. position X-ONE in the special housing and fasten X-ONE to the panel with 6 XVGS11350 connectors The side supports of the template are fastened with bolts so that they can be easily removed for installations in non-standard or particularly complex positions. See the installation on the geometry of the base nodes in figures 1 and 2 below. 1 2 34 X-ONE
84 Pagina’s | Geldig tot 04/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
