Pneumax - Hauptkatalog Pagina 1009
Commercieel klantenaanbod**Beste verkopers van Pneumax GmbH
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Rotary actuators Series 1330-1331-1332-1333 Series 1330-1331-1332-1333, rotary actuators Construction characteristics End cap UNI 5079 aluminium alloy casting Central body oxidised aluminium Pinion 18 NiCrMo4 cemented and tempered Rack C43 Barrel anodised aluminium Ra=0.3-0.5 Sliding shoe acetal resin Cushion bushings hardened aluminium Piston vulcanized rubber block on steel core with incorporated permanent magnet or without magnet plus rear spacer for non magnetic version Seals NBR 80 shore rubber Cushion adjustment screw nickel plated steel Rotating angle adjustment assy nickel plated brass 3 Fluid Filtered air. No lubrication needed, if applied it shall be continuous. Max. pressure 10 bar Working temperature -5°C - +70°C Standard rotation 90° - 180° - 270° - 360°(+1°) Rotating angle adjustment assy ±10° (±5° start position, ±5° end position) Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. Bore 32 40 50 63 80 100 Torque moments Nm/bar 0,9 1,7 2,9 5,55 13,2 23,8 Axis load max. kg. 8 10 10 12 18 22 Cushioning angle 60° 60° 50° 50° 40° 40° Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 3 | 213 Pneumatic actuatiOn Operational characteristics
1106 Pagina’s | Geldig tot 06/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.