Pneumax - Hauptkatalog Pagina 1008
Commercieel klantenaanbod**Beste verkopers van Pneumax GmbH
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Cable cylinders Series 1601 1600 Series, Cable driven cylinders General The cable driven cylinders work in a linear translation systems, they are very compact and can be used where a normal cylinder with a rigid rod is too cumbersome. The main characteristic of the cable cylinders is the absence of the rod which, in coming out of the end plate at the end of the stroke, doubles the total overall dimension of the cylinder. In the case of the cable cylinder, the rod is replaced by a metal rilsan-coated cable. It is connected to the piston and coming at the maximum point of stroke never exceeds the overall dimensions of the cylinder. The cable is connected to the bracket with clamps which serve also to regulate the tension. Because of the construction characteristics of this type of cylinder it must be used with much care. The cable is capable of supporting large stress due to heavy load and high speed. Unfortunately, we cannot give definitive limits of use if not in presence of masses of a few kilograms to be translated (7 - 10 for 16 and 20 - 25 for Ø 25) with speed inversely proportional to the entity of the same load (max 0,5 m/sec). This is done in a way that the load always has a mechanical stop at the end of the stroke. The magnetic piston version lengthens the overall dimensions by 50 mm; the 1200 series microcylinder sensors are used along with the clips of that series. Construction characteristics Technical characteristics Filtered air. Max. pressure:6 bar Min. and max. temperature: -5°C - +70°C Max speed: 0.5 m/sec. No lubrication needed, "Attention: Dry air must be used for application below 0°C” if applied it shall be continuous. C D Standard 86 124 Magnetic 161 182 136 174 26 B 132 13 A 111 35 Ø5,5 Ø6 A+stroke B+stroke 40 37 17 73 19 G1/8 Bore 16 30 M6 25 35 Ø5,5 15 C+stroke 29,5 22,5 D+stroke G1/8 Bore 25 30 68 1601.Ø.stroke 1601.Ø.stroke.M Version with magnetic piston 35 Ordering code 10,5 Pneumatic actuatiOn 3 NBR 80 Shore (at lip) PUR steel brass aluminium with ball bearing Piston seals Cable seal Bracket Cable clamps Pulleys anodised black aluminium anodised aluminium aluminium steel Rilsan End caps Barrel Piston Cable Cable covering Maintenance The cable is obviously the part most subject to breakage. The cylinder can be disassembled for replacement of the cable which is supplied already complete with threaded bushings to be screwed on to the piston. Once the wear of the barrel and seals has been checked, the cylinders can be reassembled by screwing on the end plates. Next, the ends of the cable are attached to the bracket by way of clamps and the tension regulated. The tension is correct when the cable is not cambered. 3 | 212 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
1106 Pagina’s | Geldig tot 06/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.