Hase Safety Gloves Collection - English Pagina 10
Commercieel klantenaanbod**Beste verkopers van Hase Safety Gloves
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
19 EN 511 - THERMAL RISKS (COLD) This standard applies to gloves that offer protection against convection and contact cold down to -50°C. The pictogram is accompanied by three performance levels. EN 511 ABC EN ISO 11393 - PROTECTION AGAINST HAND-HELD CHAINSAWS EN ISO 11393-4 defines the requirements for personal protective equipment (PPE) for users of hand-held chain saws. Part 4 of this standard refers to protective gloves. Performance levels cut protection classes A - convective cold Level 1 - 4 In a cold chamber, the isolation properties of a glove are measured until the cold breaks through. Class 1 20m/s chain speed (standard) B - contact cold Level 1 - 4 During a direct cold contact it is measured how long it takes until the cold breaks through. Class 2 24m/s chain speed C - water resistance Level 0 - 1 After 30 minutes of wetting a glove, it is measured, if water is able to leak inside. Class 3 28m/s Chain speed 0 means not passed, level X can be used for A to C and stands for "not tested" or "not relevant" - e.g. X2X COLD & WET EN 11393 class X
65 Pagina’s | Geldig tot 12/2023 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
