Ganter Norm Standard Parts - Catalogue Pagina 1646
Commercieel klantenaanbod**Beste verkopers van Ganter Norm
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Universal Joints with Needle Bearing, Type EW The graph shows the transferable performance N and the torques M of universal joints DIN 808, type EW (single jointed, needle bearing) in relation to the RPM n. 3.1 Determining the Size Conversion formulae: N [kW] Torque M [Nm] = 9550 M [Nm] x n [min-1] 9550 1 PS = 0.736 kW 3.5 1 kW = 1.36 PS n [min-1] 3.4 Performance N [kW] = 3.3 For larger inclination angles ß, a nominal performance N increased by the correction coefficient k and/or a nominal torque M has to be selected (see example below). 3.2 The values are applicable to a steady RPM, a steady load and an inclination angle of max. 10°. Example 1 = 5.5 kW = 2300 min-1 = 10° Correction coefficient k =1 Indicative performance N = Nominal performance N 3.6 Performance N to be transferred RPM n Inclination angle ß The next larger universal joint corresponding to point P is the model with a diameter d1 = 28 mm. 3.7 Intersection point P results from 5.5 kW and 2300 min-1 (which corresponds to a torque of 23 Nm). Torque M to be transferred RPM n Inclination angle ß = 23 Nm = 2300 min-1 = 18° 3.8 Example 2 Intersection point P1 results from 33 Nm and 2300 min-1 (which corresponds to an indicative performance N = 7.9 kW). The next larger universal joint corresponding to point P1 is the model with a diameter d1 = 32 mm. 3.6 Moving, Transferring, Connecting with Shafts and Joints | Page 1645 3.9 Correction coefficient k = 1.43 Indicative torque M = 1.43 x 23 Nm = 33 Nm
2210 Pagina’s | Geldig tot 12/2026 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
