Ganter Norm Standard Parts - Catalogue Pagina 1645
Commercieel klantenaanbod**Beste verkopers van Ganter Norm
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Universal Joints with Friction Bearing, Type EG Determining the Size The graph shows the transferable performance N and the torques M of universal joints DIN 808, type EG (single jointed, friction bearing) in relation to the RPM n. The values are applicable to a steady RPM, a steady load and an inclination angle of max. 10°. They are not applicable to stainless steel universal joints. For larger inclination angles ß, a nominal performance N increased by the correction coefficient k and/or a nominal torque M has to be selected (see example below). Conversion formulae: Torque M [Nm] Performance N [kW] = 1 kW = 1.36 PS N [kW] = 9550 n [min-1] M [Nm] x n [min-1] 9550 1 PS = 0.736 kW Example 1 Performance N to be transferred RPM n Inclination angle ß = 0.65 kW = 230 min -1 = 10° Correction coefficient k =1 Indicative performance N = Nominal performance N Intersection point P results from 0.65 kW and 230 min-1 (which corresponds to a torque of 27 Nm). The next larger universal joint corresponding to point P is the model with a diameter d1 = 25 mm. Example 2 Torque M to be transferred RPM n Inclination angle ß = 27 Nm = 230 min-1 = 30° Correction coefficient k = 2.25 Indicative torque M = 2.25 x 27 Nm = 60 Nm Intersection point P1 results from 61 Nm and 230 min-1 (which corresponds to an indicative performance N = 1.47 kW). The next larger universal joint corresponding to point P1 is the model with a diameter d1 = 36 mm. Page 1644 | 3.6 Moving, Transferring, Connecting with Shafts and Joints
2210 Pagina’s | Geldig tot 12/2026 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
