fischer Rögzítőrendszerek főkatalógusa Pagina 301
Commercieel klantenaanbod**Beste verkopers van Fischer
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Aircrete anchor FPX-I · High performance steel anchors Loads Aircrete anchor FPX-I Permissible loads¹) and required component dimensions in aerated concrete masonry. For the design the complete current assessment ETA-12/0456 has to be considered. Type Effective anchorage depth FPX-I M6 , M8 , M10 , M12 hef [mm] 70 0.32 Permissible load²) (Fperm) per anchor fAAC ≥ 1,6 N /mm² / ρm ≥ 0,25 kg/dm³ Fperm [kN] fAAC ≥ 2,0 N /mm² / ρm ≥ 0,35 kg/dm³ Fperm [kN] 0.43 fAAC ≥ 4,0 N /mm² / ρm ≥ 0,50 kg/dm³ Fperm [kN] 0.89 fAAC ≥ 6,0 N /mm² / ρm≥ 0,65 kg/dm³ Fperm [kN] 1.43 Minimum member thickness with drill hole cleaning hmin [mm] 100 Minimum member thickness without drill hole cleaning hmin [mm] 120 Component dimensions 4 Single anchor Minimum spacing a [mm] 375 Minimum edge distance c1 [mm] 125 Minimum distance to joints cF³) [mm] 754) / 125 Minimum edge distance orthogonal to c1 c2 [mm] 190 shear and oblique tension only axial tension smin [mm] 100 100 Anchor groups5) with 2 or 4 ancors Actions Minimum spacing between anchor group and 2 single anchors Minimum edge distance c1 [mm] 250 125 Minimum spacing a [mm] 750 375 Minimum edge distance orthogonal to c1 c2 [mm] 375 190 ¹) Permissible loads of a single anchor for all load directions. The required partial safety factors for material resistance as well as a partial safety factor for load actions of γL = 1.4 are considered. ²) Grade of the screw resp. threaded rod ≥ 4.8. ³) In case of non visible joints Fperm has to be divided in halve. Accurate data see ETA. 4) cF for tensile load and/or shear load parallel to the joint which is not filled with mortar with width ≤ 2 mm. 5) Fperm,group = 2 x Fperm,single anchor valid in case of anchor groups with 2 or 4 anchors. Accurate deta see ETA. a c1 c2 ≥ 1,5 x c1 c1 smin smin cF hmin 301
684 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.