Rothoblaas - X-RAD Pagina 57
Commercieel klantenaanbod**Beste verkopers van RothoBlaas Deutschland
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
X-ONE X-PLATE X-SEAL STEP 7 STEP 8 Tracing the positioning holes for the X-PLATE plates on site. Positioning the X-PLATE plates on the foundation base in reinforced concrete. STEP 9 STEP 10 The X-PLATE plates are positioned and levelled to the required height. The CLT panel, with the bottom edge aligned with the intrados of the plate, will continue to support the foundation. Once the plates have been positioned, the operator will drill a Ø24 mm hole in the reinforced concrete support for the subsequent insertion of the Ø20 mm chemical anchors. The fasteners adjacent to the vertical wings of the plate (A) must be installed before assembling the CLT walls, those furthest away (B) can be installed later. The tolerance between the diameter of the anchor and the hole in the plate, to be filled with structural resin, allows the position of the plate to still be adjusted. 100 70 A A A B B B B B B STEP 11 STEP 12 Positioning the base walls: X-ONE housing in the X-PLATE plates and connection with bolts, nuts and washers. Positioning the mid-floor walls and roof: X-ONE housing in the X-PLATE plates and connection with bolts, nuts and washers. NOTE: Video showing assemble of the system is available on www.rothoblaas.com. X-PLATE 55
84 Pagina’s | Geldig tot 04/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
