fischer Rögzítőrendszerek főkatalógusa Pagina 183
Commercieel klantenaanbod**Beste verkopers van Fischer
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Weather facing reconstruction system FWS II · Chemical fixings Loads Weather facing reconstruction system FWS II Permissible shear loads¹) ²) for a single anchor in a load-bearing skin made of concrete ≥ C12/15. For the design the complete approval Z-21.8-2029 has to be considered. Cracked and non-cracked concrete Effective anchorage depth in the load-bearing skin Thickness of load-bearing layer Thickness of thermal insulation³) Thickness ofouter leaf Permissible bending moment Permissible shear load4) Mindestrandabstand5) hef ≥ hT ≥ hD ≤ hw ≥ Mzul Vzul cmin (c W , c T) Type [mm] [mm] [mm] [mm] [Nm] [kN] [mm] FWS II - A 180 70 80 70 40 1310 11.5 150 FWS II - A 205 70 80 95 40 1310 9.5 150 FWS II - A 230 70 80 120 40 1310 8.1 150 3 ¹) Required safety factors are considered. The given loads are valid under the pre-condition that an additional thermal insulation will be applied on the weather facing. ²) The given loads are valid for fixations in dry and humid concrete for temperatures in the substrate up to +50 °C (resp. short term up to 80 °C) and drillhole cleaning according to approval. ³) For bigger insulation thicknesses special lengths are possible. 4) The determination of the permissible shear load for special lengths is done according Annex 3 and 4 of the approval. 5) For exact arrangement of the bolts as well as for eventually needed additional proofs see approval. 183
684 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
