GEDORE Automotive KLANN Main catalog General Repairs Pagina 59
Offerta per clienti commerciali**Prodotti della pagina del catalogo
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
KL-0250-41 KA Extractor with Extraction Device for Clamping Bolt, Audi A4/A6 KL-0250-41 KA Suitable for Audi A4 (8E) and A6 (2004 onwards). Essential tool for the professional extraction of the upper wishbone pivot pin clamping bolt from the steering knuckle clamping bore. 2 The extractor KL-0250-41 KA with its proper pressure unit and extraction device, enables the quick and professional extraction of hex clamping bolts. The extraction device is used to pull out the loosened hex clamping bolt. The tool is suitable for both right-hand and left-hand wheel suspensions. Example of use: • Mount extractor with pressure unit and fixing unit to steering knuckle. • Screw in the hex nut of the pressure unit using special socket (24mm waf) and a 1/2“ impact wrench. The hex clamping bolt is pressed out. The loosening process takes place with a loud noise. • Remove extractor. Mount extraction device to extract the loosened clamping bolt. • Screw in the hex nut of the extraction device using the special socket (24mm waf) and remove the hex clamping bolt completely. Technical Data: Weight: 8.2kg Advantages: • High cost savings. • Substantial time savings of approximately 2-3 hours. • No risk of damage to suspension components. Scope of Delivery: KL-0250-41 KA Extractor with Extraction Device for Clamping Bolt Audi A4 / A6 Part No. KL-0250-410 KL-0250-416 KL-0250-417 KL-0250-4190 Description Extractor for Clamping Bolt Extraction Device for Clamping Bolt, Size 16mm Upgrade Kit, Audi A6 Plastic Storage Case Qty 1 1 1 1 KL-0250-42 Pivot Pin Removal Tool KL-0250-42 Suitable for Audi A4 (2001 onwards) and Audi A6 (2004 onwards). This tool is designed to punch out pivot pins from wishbone struts. KL-0250-43 K Drill-Out Tool Kit for Strut Bolts, Audi KL-0250-42 Applicable to Audi A4 (8E, 8H, 8K); A5 (8T); A6 (4B, 4G, 4F); Q5 (8R), A7 (4GA, 4GF), A8 (4D) and Seat Exeo (3R2, 3R5) with aluminium steering knuckle. The KL-0250-43 K drill-out tool kit allows the user to professionally drill out upper strut clamping bolts as found on aluminium steering knuckles. An indispensable tool kit when clamping bolts are a tight fit or seized in place. When drilling out strut bolts on steering knuckles with low-mounted steering gear, the steering knuckle needs to be locked in fully turned position by means of the clamping device that comes with the kit. This will prevent damage to the mudguard. The use of this tool kit eliminates the need for cost-intensive replacement of the complete steering knuckle with wheel bearing unit. Copyright GEDORE Automotive GmbH, Germany formerly (59) 2-15
580 pagine | Valido fino a 12/2025 | Previous page | Pagina successiva
Selezionare la lingua
Questioni legali
Il produttore è esclusivamente responsabile del contenuto, del prezzo e dei dettagli degli articoli dei prodotti e delle offerte presentati nei cataloghi. Con riserva di modifiche tecniche e ottiche da parte del produttore e salvo errori.
Modulo di richiesta per prodotti speciali
Il servizio di acquisto di ToolTeam®
State cercando dei prodotti che sono mostrati nel catalogo ma che non possono essere acquistati direttamente online?Il nostro servizio di approvvigionamento sarà lieto di farvi un’offerta individuale e non vincolante.