GEDORE Automotive KLANN Main catalog General Repairs Page 59
Commercial customer offer**Products from catalog page
KL-0250-41 KA Extractor with Extraction Device for Clamping Bolt, Audi A4/A6 KL-0250-41 KA Suitable for Audi A4 (8E) and A6 (2004 onwards). Essential tool for the professional extraction of the upper wishbone pivot pin clamping bolt from the steering knuckle clamping bore. 2 The extractor KL-0250-41 KA with its proper pressure unit and extraction device, enables the quick and professional extraction of hex clamping bolts. The extraction device is used to pull out the loosened hex clamping bolt. The tool is suitable for both right-hand and left-hand wheel suspensions. Example of use: • Mount extractor with pressure unit and fixing unit to steering knuckle. • Screw in the hex nut of the pressure unit using special socket (24mm waf) and a 1/2“ impact wrench. The hex clamping bolt is pressed out. The loosening process takes place with a loud noise. • Remove extractor. Mount extraction device to extract the loosened clamping bolt. • Screw in the hex nut of the extraction device using the special socket (24mm waf) and remove the hex clamping bolt completely. Technical Data: Weight: 8.2kg Advantages: • High cost savings. • Substantial time savings of approximately 2-3 hours. • No risk of damage to suspension components. Scope of Delivery: KL-0250-41 KA Extractor with Extraction Device for Clamping Bolt Audi A4 / A6 Part No. KL-0250-410 KL-0250-416 KL-0250-417 KL-0250-4190 Description Extractor for Clamping Bolt Extraction Device for Clamping Bolt, Size 16mm Upgrade Kit, Audi A6 Plastic Storage Case Qty 1 1 1 1 KL-0250-42 Pivot Pin Removal Tool KL-0250-42 Suitable for Audi A4 (2001 onwards) and Audi A6 (2004 onwards). This tool is designed to punch out pivot pins from wishbone struts. KL-0250-43 K Drill-Out Tool Kit for Strut Bolts, Audi KL-0250-42 Applicable to Audi A4 (8E, 8H, 8K); A5 (8T); A6 (4B, 4G, 4F); Q5 (8R), A7 (4GA, 4GF), A8 (4D) and Seat Exeo (3R2, 3R5) with aluminium steering knuckle. The KL-0250-43 K drill-out tool kit allows the user to professionally drill out upper strut clamping bolts as found on aluminium steering knuckles. An indispensable tool kit when clamping bolts are a tight fit or seized in place. When drilling out strut bolts on steering knuckles with low-mounted steering gear, the steering knuckle needs to be locked in fully turned position by means of the clamping device that comes with the kit. This will prevent damage to the mudguard. The use of this tool kit eliminates the need for cost-intensive replacement of the complete steering knuckle with wheel bearing unit. Copyright GEDORE Automotive GmbH, Germany formerly (59) 2-15
580 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.