Rothoblaas - X-RAD Page 57
Offre client commercial**Meilleures ventes de RothoBlaas Deutschland
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
X-ONE X-PLATE X-SEAL STEP 7 STEP 8 Tracing the positioning holes for the X-PLATE plates on site. Positioning the X-PLATE plates on the foundation base in reinforced concrete. STEP 9 STEP 10 The X-PLATE plates are positioned and levelled to the required height. The CLT panel, with the bottom edge aligned with the intrados of the plate, will continue to support the foundation. Once the plates have been positioned, the operator will drill a Ø24 mm hole in the reinforced concrete support for the subsequent insertion of the Ø20 mm chemical anchors. The fasteners adjacent to the vertical wings of the plate (A) must be installed before assembling the CLT walls, those furthest away (B) can be installed later. The tolerance between the diameter of the anchor and the hole in the plate, to be filled with structural resin, allows the position of the plate to still be adjusted. 100 70 A A A B B B B B B STEP 11 STEP 12 Positioning the base walls: X-ONE housing in the X-PLATE plates and connection with bolts, nuts and washers. Positioning the mid-floor walls and roof: X-ONE housing in the X-PLATE plates and connection with bolts, nuts and washers. NOTE: Video showing assemble of the system is available on www.rothoblaas.com. X-PLATE 55
84 Pages | Valable jusqu’au 04/2024 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.
