TS set TS 93 GSR/V-EMR 1 silver EN 2-5 Normalmont.Bands.DORMAKAB A 3000255288

consisting of: 2 x TS 93 B door closers slide channel door closers to EN 1154 - size EN 2-5 - in Contur design - with sharply decreasing opening torque for easy door opening acc. DIN SPEC 1104 - for installation on the hinge side - closing speed and latching action can be conveniently and infinitely adjusted from the front via a valve - hydraulically controlled opening damping and closing delay adjustable - mounting bracket with universal hole group system - can be used DIN left and right - for door leaf installation on hinge side (opening angle up to 180° possible) or lintel installation on opposite hinge side (opening angle limited to approx. 120° - 145°) Sliding rail GSR-EMR 1 Contur Design for TS 93 B - ensures the correct sequence when closing 2-leaf doors leaf doors - individual hold-open of the door leaves - in the event of an alarm or power failure, the hold-open function is cancelled and the door is closed by the door closer - activation is via an integrated smoke detection control panel - the hold-open function can also be easily triggered manually thanks to the adjustable release force (no tools required) - can be used for DIN-L and DIN-R doors - is combined with DORMA TS 93 B door closers - installation on hinge side - for doors, for doors where the hold-open point should be above 130°, we recommend using DORMA EM holding magnets in place of the electromechanical hold-open device - Version for door widths: V= 1700-2500 mm Other technical features: - Version: Complete set