TIG welding unit WT-TIG 200 AC/DC w.accessory 5-200 A gas WELDING TEAM 1000152161

Inverter technology · Ideally suited for assembly work due to IP21S protection class, also generally for outdoor work · TIG pulsing enables welding with reduced heat input · HF high-frequency ignition ignites during TIG welding without touching the workpiece · Time-controlled fan with standby mode · Adjustable balance · Exact setting of the welding parameters via digital display · Unit equipped with PFC (power factor correction), enables optimal use even on cable drums · optionally with water cooling · multi-voltage from 110 to 230 volts · 9 programmes can be stored · alternating current delta wave welding output: reduced heat input for the same current setting, particularly useful for welding thin metal · alternating current sine wave welding output · alternating current square wave · MMA mode · adjustable welding curve · Contents: TIG welding machine, 4 m pre-assembled earth cable, 4 m gas hose, pressure reducer 200 bar argon / CO2, power cable 4 m Further technical information: · Width: 190mm · Length: 580mm · Welding current at 35% duty cycle/40° C: 200A · Operating modes: 2-step / 4-step / spot welding / pulsing · Ignition type: high frequency · Weight: 15.5kg · Mobility: portable · Protection class: IP21 S · Type of current: AC · Version: with accessories · Height: 350mm · Welding process: TIG (AC/DC), E-Hand · Mains voltage: 230 V / 50 Hz · Fuse protection: 16A · Pulsing: 0.5-999Hz · Power input: 5kVA · Open-circuit voltage: 75.6V Scope of delivery: TIG welding system, 4 m pre-assembled ground cable, 4 m gas hose, 200 bar pressure reducer argon / CO2, 4 m mains cable