Rothenberger Drill stand RODIACUT 400 Pro dowel plate FF30030

The RODIACUT 400 drill stand is a fully equipped drill stand that, in conjunction with a diamond drill motor, can produce stationary core drillings of Ø 10-500 mm. It has a drill hole center indicator, a drilling depth stop and a measuring scale. The drilling angle can be adjusted quickly, easily and without tools from 90° - 45°. The adjustable hand lever enables the operating side to be changed without tools and is also suitable for drilling flush with the wall.The RODIACUT 400 drill stand offers quick and precise alignment of the RODIADRILL drill motor thanks to the integrated bubble level. The drilling angle can also be adjusted from 90° to 45°. The torsion-resistant aluminum drill column ensures a robust and lightweight construction.

Installers from the SHK, electrical and gardening industries can carry out stationary core drilling with the RODIACUT 400 PRO drill stand and a matching diamond drill motor.

The RODIACUT 400 PRO drill stand can be used with a stationary drill motor to drill core holes from Ø 32 -400 mm, optionally with a spacer plate also Ø 500 mm.

Robust drill stand up to Ø 400mm drilling range, can be extended to Ø 500 mm with a spacer plate. 4-fold roller guide, for precise and low-vibration drilling, easy to readjust. Fine feed with 1:3 ratioIn 1:1 mode, only long distances are bridged, such as retrieving the core bit from the hole. Drilling is carried out in the 1:3 module to minimize the load on the core bit and drill stand. Anodized aluminum drill column reinforced with steel rails for professional use. Drill angle adjustment from -15° to 45°, in 2.5° increments. Adjustable hand lever can be changed without tools and for drilling flush with the wall. Standard hole pattern for holding stationary drill motors. 4 adjustment screws for quick and precise alignment of the drill stand. Transport wheels for easy handling on stairs or long distances.