zoom_in
zoom_out
fullscreen
-21%
PCE ultrasonic flow meter PCE-TDS 75 for permanent installation
Sku: T-910263
€1,276.89 (excl. legal VAT, excl. Shipping)
€1,624.92 MSRP
In stock,ready for shipping within 24h
Piece
Content:
1 Piece
Shipping:
€199.92 Versandservice to United Kingdom
For orders from €1,000.00 order total plus €34.45 Customs MRN registration
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-910263
SKU manufacturer:
PCE-TDS 75
GTIN Code (EAN):
4250348722560
Weight:
2,59 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
A stationary ultrasonic flowmeter is a device for continuous monitoring of the flow rate of liquids in pipelines. One of the advantages of the measuring principle is that the sensors of stationary ultrasonic flow meters can be easily mounted on the outside of the pipeline. For installation, the pipes do not have to be cut open or drilled into. This allows the measuring system to be installed without draining the pipelines. Due to the non-contact measuring principle of stationary ultrasonic flow meters, they can also be used in areas with high hygiene requirements - for example in the food industry. Depending on the conditions on site, our stationary flow meter can measure either with the reflection method or with the direct method.
For reflection measurement, also known as the V-method, both sensors are mounted side by side on the same side of the pipeline parallel to the flow direction. One of the sensors emits ultrasonic waves, and the other sensor receives the waves reflected from the opposite side of the pipe. In contrast, for direct measurement, also called the Z method, the sensors are mounted on opposite sides of the pipe. Our stationary ultrasonic flowmeter offers many setting and query options in the device menu. All necessary settings can be made directly at the installation site via keyboard entries on the device.
The membrane keypad also has a numeric keypad for quick entry of numeric values. After connecting the device, the data of the measuring point such as diameter, thickness and material of the pipe must first be entered in menu M10 Pipe settings” so that the measured values can be converted correctly. In menu M14 ”INSTL Spacing” the calculated mounting distance for the sensors can be read. After mounting the sensors, it can then be read in another menu whether the strength and quality of the signals are sufficient for reliable measurements. If not, the arrangement of the sensors can be adjusted or, if necessary, another measuring point can be selected.
For reflection measurement, also known as the V-method, both sensors are mounted side by side on the same side of the pipeline parallel to the flow direction. One of the sensors emits ultrasonic waves, and the other sensor receives the waves reflected from the opposite side of the pipe. In contrast, for direct measurement, also called the Z method, the sensors are mounted on opposite sides of the pipe. Our stationary ultrasonic flowmeter offers many setting and query options in the device menu. All necessary settings can be made directly at the installation site via keyboard entries on the device.
The membrane keypad also has a numeric keypad for quick entry of numeric values. After connecting the device, the data of the measuring point such as diameter, thickness and material of the pipe must first be entered in menu M10 Pipe settings” so that the measured values can be converted correctly. In menu M14 ”INSTL Spacing” the calculated mounting distance for the sensors can be read. After mounting the sensors, it can then be read in another menu whether the strength and quality of the signals are sufficient for reliable measurements. If not, the arrangement of the sensors can be adjusted or, if necessary, another measuring point can be selected.
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-21%
Measuring connection adapter for wallboxes PCE-EVSE 310
PCE-EVSE 310
€269.49
€339.91 MSRP
-21%
Ultrasonic Flow Meter PCE-TDS 200+ ML
PCE-TDS 200+ ML
€2,907.48
€3,699.91 MSRP
-21%
Flow meter for fixed installation PCE-UFM 50CU
PCE-UFM 50CU
€1,198.31
€1,524.92 MSRP
-21%
Aw value measuring device PCE-WAT 10
PCE-WAT 10
€785.76
€999.91 MSRP
-21%
heating mantle PCE-HM 250
PCE-HM 250
€118.87
€149.91 MSRP
-21%
whiteness meter PCE-WNM 100
PCE-WNM 100
€412.18
€519.91 MSRP
-20%
PT-100 converter PCE-P17PT-1
PCE-P17PT-1
€61.50
€76.89 MSRP
-21%
work safety measuring device PCE-SLD 10
PCE-SLD 10
€290.88
€366.89 MSRP
-21%
Digital refractometer PCE-DRD 2
PCE-DRD 2
€191.76
€241.89 MSRP
-21%
Digital refractometer PCE-DRF 2
PCE-DRF 2
€231.43
€291.89 MSRP
-21%
Radiation meter PCE-RAM 8
PCE-RAM 8
€144.20
€181.89 MSRP
-21%
Accelerometer PCE-VT 3800S
PCE-VT 3800S
€840.76
€1,069.91 MSRP
-21%
installation tester PCE-ITE 50
PCE-ITE 50
€903.61
€1,149.91 MSRP
-21%
PCE-COM 20 conductivity meter | large measuring range up to 112% IACS or 65 MS/m | nFe metals | 60 kHz
PCE-COM 20
€5,048.87
€6,424.92 MSRP
-21%
insulation meter PCE-IT55
PCE-IT55
€178.31
€224.92 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE ultrasonic flow meter PCE-TDS 75 for permanent installation
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
A stationary ultrasonic flowmeter is a device for continuous monitoring of the flow rate of liquids in pipelines. One of the advantages of the measuring principle is that the sensors of stationary ultrasonic flow meters can be easily mounted on the outside of the pipeline. For installation, the pipes do not have to be cut open or drilled into. This allows the measuring system to be installed without draining the pipelines. Due to the non-contact measuring principle of stationary ultrasonic flow meters, they can also be used in areas with high hygiene requirements - for example in the food industry. Depending on the conditions on site, our stationary flow meter can measure either with the reflection method or with the direct method.
For reflection measurement, also known as the V-method, both sensors are mounted side by side on the same side of the pipeline parallel to the flow direction. One of the sensors emits ultrasonic waves, and the other sensor receives the waves reflected from the opposite side of the pipe. In contrast, for direct measurement, also called the Z method, the sensors are mounted on opposite sides of the pipe. Our stationary ultrasonic flowmeter offers many setting and query options in the device menu. All necessary settings can be made directly at the installation site via keyboard entries on the device.
The membrane keypad also has a numeric keypad for quick entry of numeric values. After connecting the device, the data of the measuring point such as diameter, thickness and material of the pipe must first be entered in menu M10 Pipe settings” so that the measured values can be converted correctly. In menu M14 ”INSTL Spacing” the calculated mounting distance for the sensors can be read. After mounting the sensors, it can then be read in another menu whether the strength and quality of the signals are sufficient for reliable measurements. If not, the arrangement of the sensors can be adjusted or, if necessary, another measuring point can be selected. T-910263 PCE-TDS 75 4250348722560 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-ultrasonic-flow-meter-pce-tds-75-for-permanent-installation-t-910263-4250348722560?dc=GB&cu=EUR 2026-09-16 1276.89 United Kingdom GB DE 14
For reflection measurement, also known as the V-method, both sensors are mounted side by side on the same side of the pipeline parallel to the flow direction. One of the sensors emits ultrasonic waves, and the other sensor receives the waves reflected from the opposite side of the pipe. In contrast, for direct measurement, also called the Z method, the sensors are mounted on opposite sides of the pipe. Our stationary ultrasonic flowmeter offers many setting and query options in the device menu. All necessary settings can be made directly at the installation site via keyboard entries on the device.
The membrane keypad also has a numeric keypad for quick entry of numeric values. After connecting the device, the data of the measuring point such as diameter, thickness and material of the pipe must first be entered in menu M10 Pipe settings” so that the measured values can be converted correctly. In menu M14 ”INSTL Spacing” the calculated mounting distance for the sensors can be read. After mounting the sensors, it can then be read in another menu whether the strength and quality of the signals are sufficient for reliable measurements. If not, the arrangement of the sensors can be adjusted or, if necessary, another measuring point can be selected. T-910263 PCE-TDS 75 4250348722560 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-ultrasonic-flow-meter-pce-tds-75-for-permanent-installation-t-910263-4250348722560?dc=GB&cu=EUR 2026-09-16 1276.89 United Kingdom GB DE 14