zoom_in
zoom_out
fullscreen
-24%
PCE Measuring connection adapter for wallboxes PCE-EVSE 310
Sku: T-1515388
€257.61 (excl. legal VAT, excl. Shipping)
€339.91 MSRP
In stock,ready for shipping within 24h
Piece
Content:
1 Piece
Shipping:
€73.87 Versandservice to United Kingdom
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-1515388
SKU manufacturer:
PCE-EVSE 310
GTIN Code (EAN):
4250348732323
Weight:
0,88 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The measuring connection adapter for wallboxes is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This adapter can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.
The PP State rotary switch can be used to simulate the current carrying capacity of the charging cable. The current carrying capacity is simulated with various resistors in the measuring connection adapter for wallboxes, which are connected between the PP and PE conductors. Various vehicle states can be simulated using the CP State rotary switch. The vehicle states are simulated with different resistors connected between the CP and PE conductors. An external load can be connected to the socket. This output is only intended for measuring purposes and allows the function of the electricity meter to be checked. In addition, a PE fault (earth fault) can also be simulated with the measuring connection adapter for wallboxes.
The measuring connection adapter for wallboxes is supplied in a device bag. An optional adapter is also available for wallboxes with a type 1 connection.
Test functions
PE Pre-test yes, with capacitive electrode
PP Simulation open, 13 A, 20 A, 32 A, 63 A
CP Status A, B, C, D
CP Fault ‘E’ E
PE Fault / earthing fault yes
General technical data
Connections L1, L2, L3, N, PE
Connections Additional information max. 230V (1-phase) / 430V (3-phase) ; 50 / 60Hz,
10A / 250 V,
Type 2 plug permanently attached to the cable,
(optional adapter required for type 1),
Standard(s) IEC62196-2 type 2 plug
Cable length 25 cm
Safety standard CAT II / 300V
Mains socket max. 250 V; 50/60 Hz; 10 A
Outputs 2 pcs. 4mm sockets (signal output terminals)
Fuse(s) mains socket T10A/250V
Protection class (device) IP40
Operating conditions 0 ... 40 °C , 0 ... 80 % r. h.Storage conditions -10 ... 50 °C , 0 ... 80 % r. H.Dimensions ( L x W x H ) 600 x 105 x 73 mmWeight 643 g
1 x Measuring connection adapter for wallboxes PCE-EVSE 310
1 x Operating instructions
1 x Carrying bag
The PP State rotary switch can be used to simulate the current carrying capacity of the charging cable. The current carrying capacity is simulated with various resistors in the measuring connection adapter for wallboxes, which are connected between the PP and PE conductors. Various vehicle states can be simulated using the CP State rotary switch. The vehicle states are simulated with different resistors connected between the CP and PE conductors. An external load can be connected to the socket. This output is only intended for measuring purposes and allows the function of the electricity meter to be checked. In addition, a PE fault (earth fault) can also be simulated with the measuring connection adapter for wallboxes.
The measuring connection adapter for wallboxes is supplied in a device bag. An optional adapter is also available for wallboxes with a type 1 connection.
Test functions
PE Pre-test yes, with capacitive electrode
PP Simulation open, 13 A, 20 A, 32 A, 63 A
CP Status A, B, C, D
CP Fault ‘E’ E
PE Fault / earthing fault yes
General technical data
Connections L1, L2, L3, N, PE
Connections Additional information max. 230V (1-phase) / 430V (3-phase) ; 50 / 60Hz,
10A / 250 V,
Type 2 plug permanently attached to the cable,
(optional adapter required for type 1),
Standard(s) IEC62196-2 type 2 plug
Cable length 25 cm
Safety standard CAT II / 300V
Mains socket max. 250 V; 50/60 Hz; 10 A
Outputs 2 pcs. 4mm sockets (signal output terminals)
Fuse(s) mains socket T10A/250V
Protection class (device) IP40
Operating conditions 0 ... 40 °C , 0 ... 80 % r. h.Storage conditions -10 ... 50 °C , 0 ... 80 % r. H.Dimensions ( L x W x H ) 600 x 105 x 73 mmWeight 643 g
1 x Measuring connection adapter for wallboxes PCE-EVSE 310
1 x Operating instructions
1 x Carrying bag
Related results
PCE Instruments
PCE
PCE-EVSE 310
PCE EVSE 310
PCE Instruments
PCE-EVSE 310
PCE Instruments PCE-EVSE 310
EV Measuring Instrument
EV Tester
VDE Tester
VDE Tester
Automotive Measuring Instrument
Inspection Tool
EVSE Measuring Instrument
EVSE Tester
VDE Tester
PAT Tester
Portable Appliance Testing Equipment
Car Measuring Device
Electric Vehicle EVSE Tester
Electric Vehicle EV Tester
EV Test Instrument
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-25%
thickness gauge PCE-CT 80HP-F5N3
PCE-CT 80HP-F5N3
€750.75
€999.91 MSRP
-25%
PCE-432-SC 09 Portable professional sound calibrator class 1 incl. sound level meter with GPS class 1
PCE-432-SC 09
€2,169.83
€2,889.91 MSRP
-24%
Wine Refractometer PCE-DRW 2
PCE-DRW 2
€266.68
€351.89 MSRP
-25%
PCE-EMD 5 hygrometer 0.0..99.9% RH|0...50 °C|connection of up to four external sensors|anal. 4..20mA
PCE-EMD 5
€598.32
€796.89 MSRP
-24%
Radon Monitor
PCE-RD 75
€143.91
€189.91 MSRP
-23%
current transducer PCE-P17I
PCE-P17I
€53.95
€69.91 MSRP
-24%
sound level meter PCE-SLT-TRM
PCE-SLT-TRM
€269.71
€355.88 MSRP
-24%
Radiation Meter PCE-EM 29
PCE-EM 29
€201.50
€265.88 MSRP
-25%
1 + 3-phase power analyzer PCE-360 | RS-232 interface | PC cable | software | 512 K data logger
PCE-360
€1,257.56
€1,674.92 MSRP
-24%
PCE-PH20M food penetration ph meter | robust PH electrode | recalibratable | waterproof (IP67)
PCE-PH20M
€329.58
€434.92 MSRP
-24%
pH meter PCE-PHB 10 especially for outdoor use
PCE-PHB 10
€72.56
€94.92 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT3 for surfaces and water
PCE-ATP 1-KIT3
€1,441.51
€1,919.91 MSRP
-24%
PCE-BSH 10000 calibratable industrial scale max. 10 kg | piece counting function | USB | g | kg | lb | ct | gn | gsm and much more.
PCE-BSH 10000
€164.37
€216.89 MSRP
-25%
Borescope PCE-VE 380N
PCE-VE 380N
€1,614.20
€2,149.91 MSRP
-24%
PCE-DPG 3 Pressure Sensor Water & Gases | 1.4? NPT thread connection| 2.5? large display| Response time < 50 ms
PCE-DPG 3
€253.78
€334.92 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE Measuring connection adapter for wallboxes PCE-EVSE 310
PCE Instruments
PCE
PCE-EVSE 310
PCE EVSE 310
PCE Instruments
PCE-EVSE 310
PCE Instruments PCE-EVSE 310
EV Measuring Instrument
EV Tester
VDE Tester
VDE Tester
Automotive Measuring Instrument
Inspection Tool
EVSE Measuring Instrument
EVSE Tester
VDE Tester
PAT Tester
Portable Appliance Testing Equipment
Car Measuring Device
Electric Vehicle EVSE Tester
Electric Vehicle EV Tester
EV Test Instrument
The measuring connection adapter for wallboxes is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This adapter can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.
The PP State rotary switch can be used to simulate the current carrying capacity of the charging cable. The current carrying capacity is simulated with various resistors in the measuring connection adapter for wallboxes, which are connected between the PP and PE conductors. Various vehicle states can be simulated using the CP State rotary switch. The vehicle states are simulated with different resistors connected between the CP and PE conductors. An external load can be connected to the socket. This output is only intended for measuring purposes and allows the function of the electricity meter to be checked. In addition, a PE fault (earth fault) can also be simulated with the measuring connection adapter for wallboxes.
The measuring connection adapter for wallboxes is supplied in a device bag. An optional adapter is also available for wallboxes with a type 1 connection.
Test functions
PE Pre-test yes, with capacitive electrode
PP Simulation open, 13 A, 20 A, 32 A, 63 A
CP Status A, B, C, D
CP Fault ‘E’ E
PE Fault / earthing fault yes
General technical data
Connections L1, L2, L3, N, PE
Connections Additional information max. 230V (1-phase) / 430V (3-phase) ; 50 / 60Hz,
10A / 250 V,
Type 2 plug permanently attached to the cable,
(optional adapter required for type 1),
Standard(s) IEC62196-2 type 2 plug
Cable length 25 cm
Safety standard CAT II / 300V
Mains socket max. 250 V; 50/60 Hz; 10 A
Outputs 2 pcs. 4mm sockets (signal output terminals)
Fuse(s) mains socket T10A/250V
Protection class (device) IP40
Operating conditions 0 ... 40 °C , 0 ... 80 % r. h.Storage conditions -10 ... 50 °C , 0 ... 80 % r. H.Dimensions ( L x W x H ) 600 x 105 x 73 mmWeight 643 g
1 x Measuring connection adapter for wallboxes PCE-EVSE 310
1 x Operating instructions
1 x Carrying bag T-1515388 PCE-EVSE 310 4250348732323 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-measuring-connection-adapter-for-wallboxes-pce-evse-310-t-1515388-4250348732323?dc=GB&cu=EUR 2026-08-02 257.61 United Kingdom GB DE 14
The PP State rotary switch can be used to simulate the current carrying capacity of the charging cable. The current carrying capacity is simulated with various resistors in the measuring connection adapter for wallboxes, which are connected between the PP and PE conductors. Various vehicle states can be simulated using the CP State rotary switch. The vehicle states are simulated with different resistors connected between the CP and PE conductors. An external load can be connected to the socket. This output is only intended for measuring purposes and allows the function of the electricity meter to be checked. In addition, a PE fault (earth fault) can also be simulated with the measuring connection adapter for wallboxes.
The measuring connection adapter for wallboxes is supplied in a device bag. An optional adapter is also available for wallboxes with a type 1 connection.
Test functions
PE Pre-test yes, with capacitive electrode
PP Simulation open, 13 A, 20 A, 32 A, 63 A
CP Status A, B, C, D
CP Fault ‘E’ E
PE Fault / earthing fault yes
General technical data
Connections L1, L2, L3, N, PE
Connections Additional information max. 230V (1-phase) / 430V (3-phase) ; 50 / 60Hz,
10A / 250 V,
Type 2 plug permanently attached to the cable,
(optional adapter required for type 1),
Standard(s) IEC62196-2 type 2 plug
Cable length 25 cm
Safety standard CAT II / 300V
Mains socket max. 250 V; 50/60 Hz; 10 A
Outputs 2 pcs. 4mm sockets (signal output terminals)
Fuse(s) mains socket T10A/250V
Protection class (device) IP40
Operating conditions 0 ... 40 °C , 0 ... 80 % r. h.Storage conditions -10 ... 50 °C , 0 ... 80 % r. H.Dimensions ( L x W x H ) 600 x 105 x 73 mmWeight 643 g
1 x Measuring connection adapter for wallboxes PCE-EVSE 310
1 x Operating instructions
1 x Carrying bag T-1515388 PCE-EVSE 310 4250348732323 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-measuring-connection-adapter-for-wallboxes-pce-evse-310-t-1515388-4250348732323?dc=GB&cu=EUR 2026-08-02 257.61 United Kingdom GB DE 14