zoom_in
zoom_out
fullscreen
PCE lux meter PCE-LED 20
Sku: T-910081
Discontinued item
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-910081
SKU manufacturer:
PCE-LED 20
GTIN Code (EAN):
4250348716095
Weight:
0,32 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
A LED Luxmeter is used wherever a light check is necessary or recommended. The external light sensor of the LED Luxmeter can be positioned according to the needs. The cable of the sensor has a length of approx. 1.5 meters when extended.
Different work or production projects require different lighting conditions. These lighting conditions can be created by using different illuminants. In the further course you will find the recommendations of the lighting conditions in schools, factories or in offices. Our LED Luxmeter can show measured values in the display directly after switching on. So a direct measurement is easily possible. Through various presets, the functions built into the device can also be activated or deactivated. These functions include the normal HOLD function, which freezes the measured value in the display. In addition, the extreme values and also the average value can be frozen in the display. Other functions of the LED Luxmeter are the zero adjustment, the automatic switch-off and the automatic range selection. Measurements are possible with the LED Luxmeter in Lux or Foodcandle. The device is operated only by seven buttons, which allows one-handed operation. This is possible even for those who have not been instructed in the use of the device.
Our LED Luxmeter is a battery operated handheld device, which allows non-stationary measurements. The illumination sensor of the LED Luxmeter has a large exposure area. It is located on a coiled power cable, which reaches a length of about 1.5 meters when extended. However, due to the winding, it is also a measuring probe that does not need annoying cables. On the upper side of the LED Luxmeter there is a protective cap, which protects the sensor from wearing out. It should be placed on the sensor if it is not going to be used for a long time. In addition, the protective cap is needed when a zero adjustment is to be performed on the LED Luxmeter.
Different work or production projects require different lighting conditions. These lighting conditions can be created by using different illuminants. In the further course you will find the recommendations of the lighting conditions in schools, factories or in offices. Our LED Luxmeter can show measured values in the display directly after switching on. So a direct measurement is easily possible. Through various presets, the functions built into the device can also be activated or deactivated. These functions include the normal HOLD function, which freezes the measured value in the display. In addition, the extreme values and also the average value can be frozen in the display. Other functions of the LED Luxmeter are the zero adjustment, the automatic switch-off and the automatic range selection. Measurements are possible with the LED Luxmeter in Lux or Foodcandle. The device is operated only by seven buttons, which allows one-handed operation. This is possible even for those who have not been instructed in the use of the device.
Our LED Luxmeter is a battery operated handheld device, which allows non-stationary measurements. The illumination sensor of the LED Luxmeter has a large exposure area. It is located on a coiled power cable, which reaches a length of about 1.5 meters when extended. However, due to the winding, it is also a measuring probe that does not need annoying cables. On the upper side of the LED Luxmeter there is a protective cap, which protects the sensor from wearing out. It should be placed on the sensor if it is not going to be used for a long time. In addition, the protective cap is needed when a zero adjustment is to be performed on the LED Luxmeter.
Hinweise zur Batterieentsorgung:
Da in unseren Sendungen Batterien und Akkus enthalten sein können, sind wir nach dem Batteriegesetz (BattG) verpflichtet, Sie auf Folgendes hinzuweisen:
- Batterien und Akkus dürfen nicht im Hausmüll entsorgt werden, sondern Sie sind zur Rückgabe gebrauchter Batterien und Akkus gesetzlich verpflichtet.
- Altbatterien können Schadstoffe enthalten, die bei nicht sachgemäßer Lagerung oder Entsorgung die Umwelt oder Ihre Gesundheit schädigen können. Batterien enthalten aber auch wichtige Rohstoffe wie z.B. Eisen, Zink, Mangan oder Nickel und können verwertet werden.
- Sie können die Batterien nach Gebrauch entweder an uns zurücksenden oder in unmittelbarer Nähe (z.B. im Handel oder in kommunalen Sammelstellen oder in unserem Lager) unentgeltlich zurückgeben.
- Die Abgabe in Verkaufsstellen ist dabei für Endnutzer auf die übliche Mengen sowie solche Altbatterien beschränkt, die der Vertreiber als Neubatterien in seinem Sortiment führt oder geführt hat.
- Das Zeichen mit der durchgekreuzten Mülltonne bedeutet, dass Sie Batterien und Akkus nicht im Hausmüll entsorgen dürfen
Unter diesen Zeichen finden Sie zusätzlich nachstehende Symbole mit folgender Bedeutung:
- Pb = Batterie enthält mehr als 0,004 Masseprozent Blei
- Cd = Batterie enthält mehr als 0,002 Masseprozent Cadmium
- Hg = Batterie enthält mehr als 0,0005 Masseprozent Quecksilber
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Product suggestions
-24%
Radon Monitor
PCE-RD 75
€143.91
€189.91 MSRP
-24%
Radiation Meter PCE-EM 29
PCE-EM 29
€201.50
€265.88 MSRP
-25%
AW tester PCE-WAM 10
PCE-WAM 10
€579.57
€771.89 MSRP
-24%
PCE-DPG 3 Pressure Sensor Water & Gases | 1.4? NPT thread connection| 2.5? large display| Response time < 50 ms
PCE-DPG 3
€253.78
€334.92 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT3 for surfaces and water
PCE-ATP 1-KIT3
€1,441.51
€1,919.91 MSRP
-25%
Borescope PCE-VE 380N
PCE-VE 380N
€1,614.20
€2,149.91 MSRP
-25%
Hydraulic lifting table - industrial scale PCE-HLTS 500
PCE-HLTS 500
€3,266.01
€4,349.91 MSRP
-24%
Temperature / humidity transmitter PCE-P18L
PCE-P18L
€106.22
€138.90 MSRP
-24%
Wine Refractometer PCE-DRW 2
PCE-DRW 2
€266.68
€351.89 MSRP
-24%
Refractometer PCE-0100 Salinity
PCE-0100
€64.92
€84.92 MSRP
-25%
Defectoscope PCE-FD 20
PCE-FD 20
€3,452.98
€4,598.90 MSRP
-25%
Thickness Gauge PCE-CT 80HP-FN0D5
PCE-CT 80HP-FN0D5
€747.02
€994.92 MSRP
-24%
PCE-BSH 10000 calibratable industrial scale max. 10 kg | piece counting function | USB | g | kg | lb | ct | gn | gsm and much more.
PCE-BSH 10000
€164.37
€216.89 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT for surfaces
PCE-ATP 1-KIT
€1,253.82
€1,669.91 MSRP
-24%
Installation aid PCE-HVAC 10
PCE-HVAC 10
€189.37
€249.91 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE lux meter PCE-LED 20
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
A LED Luxmeter is used wherever a light check is necessary or recommended. The external light sensor of the LED Luxmeter can be positioned according to the needs. The cable of the sensor has a length of approx. 1.5 meters when extended.
Different work or production projects require different lighting conditions. These lighting conditions can be created by using different illuminants. In the further course you will find the recommendations of the lighting conditions in schools, factories or in offices. Our LED Luxmeter can show measured values in the display directly after switching on. So a direct measurement is easily possible. Through various presets, the functions built into the device can also be activated or deactivated. These functions include the normal HOLD function, which freezes the measured value in the display. In addition, the extreme values and also the average value can be frozen in the display. Other functions of the LED Luxmeter are the zero adjustment, the automatic switch-off and the automatic range selection. Measurements are possible with the LED Luxmeter in Lux or Foodcandle. The device is operated only by seven buttons, which allows one-handed operation. This is possible even for those who have not been instructed in the use of the device.
Our LED Luxmeter is a battery operated handheld device, which allows non-stationary measurements. The illumination sensor of the LED Luxmeter has a large exposure area. It is located on a coiled power cable, which reaches a length of about 1.5 meters when extended. However, due to the winding, it is also a measuring probe that does not need annoying cables. On the upper side of the LED Luxmeter there is a protective cap, which protects the sensor from wearing out. It should be placed on the sensor if it is not going to be used for a long time. In addition, the protective cap is needed when a zero adjustment is to be performed on the LED Luxmeter. T-910081 PCE-LED 20 4250348716095 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-lux-meter-pce-led-20-t-910081-4250348716095?dc=GB&cu=EUR 2026-07-07 150.71 United Kingdom GB DE 14
Different work or production projects require different lighting conditions. These lighting conditions can be created by using different illuminants. In the further course you will find the recommendations of the lighting conditions in schools, factories or in offices. Our LED Luxmeter can show measured values in the display directly after switching on. So a direct measurement is easily possible. Through various presets, the functions built into the device can also be activated or deactivated. These functions include the normal HOLD function, which freezes the measured value in the display. In addition, the extreme values and also the average value can be frozen in the display. Other functions of the LED Luxmeter are the zero adjustment, the automatic switch-off and the automatic range selection. Measurements are possible with the LED Luxmeter in Lux or Foodcandle. The device is operated only by seven buttons, which allows one-handed operation. This is possible even for those who have not been instructed in the use of the device.
Our LED Luxmeter is a battery operated handheld device, which allows non-stationary measurements. The illumination sensor of the LED Luxmeter has a large exposure area. It is located on a coiled power cable, which reaches a length of about 1.5 meters when extended. However, due to the winding, it is also a measuring probe that does not need annoying cables. On the upper side of the LED Luxmeter there is a protective cap, which protects the sensor from wearing out. It should be placed on the sensor if it is not going to be used for a long time. In addition, the protective cap is needed when a zero adjustment is to be performed on the LED Luxmeter. T-910081 PCE-LED 20 4250348716095 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-lux-meter-pce-led-20-t-910081-4250348716095?dc=GB&cu=EUR 2026-07-07 150.71 United Kingdom GB DE 14