PCE Adhesion tester PCE-DAT 500

The adhesion meter is a portable, hand-operated device that measures the force required to pull a specified test diameter of coating from the substrate using hydraulic pressure. The measured pressure is shown on the LCD display and represents the adhesion strength of the coating to the substrate. This device is used to evaluate the adhesion (peel strength) of a coating by determining the maximum tensile force it can withstand before it peels off. Breakage points, which appear as cracks along the weakest layer in the system of carrier, adhesive, coating layers and substrate, are visualised by the adhesion strength meter.

Equipped with a hand-operated hydraulic pump, our adhesion strength meter enables precise and repeatable application of the required tensile force. Thanks to the choice of different dolly sizes, the device can be flexibly adapted to different test requirements, making it particularly versatile.

In addition, the adhesion meter offers a mini-USB interface for easy transfer of measurement data to external devices. The data can be saved in the practical CSV format, which enables easy further processing and analysis. You can find additional and replacement measuring heads as well as the right base for your needs in the accessories.
Pressure
Measuring range 0.4 ... 80 MPa
Resolution 0.01 MPa
Accuracy ±1 % FS
Pressure
Measuring range 25 ... 11600 psi
Resolution 1 psi
Accuracy ±1 % FS
General technical data
Unit(s) MPa, psi
Display type LCD
Display size 2, 36 inch
Memory medium Internal memory
Memory capacity 16 MB
Interface Mini-USB
Standard(s) GB/T 5210, ASTM D4541/D7234, ISO 4624/16276-1
Automatic switch-off from . .. to 1 ... 10 min.
Menu language English (GB), English (US), Chinese
Protection class (device) IP40
Power supply 100 ... 240 V AC | 50/60 Hz
Plug type Euro plug




Battery 1 x 3.7 V 18650 , lithium-ion battery
Capacity 3400 mAh

Operating conditions 0 ... 50 °C , 10 ... 90 % r. h.Storage conditions 0 ... 50 °C , 10 ... 90 % r. H. Dimensions ( L x W x H ) 220 x 140 x 81 mmWeight 3, 25 kg
1 x Adhesion tester PCE-DAT 500
1 x Base for measuring heads 20mm
20 x Measuring heads 20mm
2 x Cutting tool for measuring heads 20mm
1 x Electric cutting tool
1 x Two-component adhesive
1 x Manual gun for double cartridges
1 x Power supply unit 5 V cartridges
1 x Power supply 5 V / 1 A
1 x USB-C cable
1 x Mini-USB cable
1 x Shoulder strap
1 x Sealing set
1 x Operating instructions
1 x Carrying case