Eurotec System case Transport anchor PICK MAX 110363
Product data
Product description
The Pick MAX transport anchor enables easy and efficient lifting of wooden parts such as plywood, laminated and solid wood. With a load cycle of up to 16,000 lifting operations and a payload of up to 2,400 kilograms per lifting point, the system developed in Austria is impressive. It only requires a blind hole with a diameter of 50 millimetres and a depth of 140 millimetres to carry out the installation. As a result, the surface quality remains intact and no additional fastening screws are required.
The Pick MAX transport anchor is supplied as a system case. The system case contains the following parts:
- 2 Pick MAX transport anchors
- 2 shackles
- Drill HMB
- Drill IB
Advantages/features
- Payload of up to 2400 kg per anchor point
- Attached in a few simple steps, no alignment of the lifting gear required.
- Visible surface quality is not damaged No fixing screws required.
- Long service life: 16,000 load cycles (in accordance with EN 13155:2020)
- Versatile application: on the end face, slab side or transverse timber side for beams of all types.
Instructions
- The specifications in the operating instructions enclosed with the item must be observed.
- Have the load handling attachment checked once a year by authorised persons. The details can be found in the enclosed operating instructions.
- Document your inspections in the maintenance log in the operating instructions.
- You are welcome to take advantage of the Pick Check offer.
- The Pick MAX transport anchor is supplied in a system case as a set for 2 lifting points and the required installation material.
- The drill hole may be used a maximum of 6 times for lifting.
- The anchor may be used a maximum of 16,000 times for lifting.
Additional information
Related results
Complete catalogs
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Product suggestions
The Pick MAX transport anchor enables easy and efficient lifting of wooden parts such as plywood, laminated and solid wood. With a load cycle of up to 16,000 lifting operations and a payload of up to 2,400 kilograms per lifting point, the system developed in Austria is impressive. It only requires a blind hole with a diameter of 50 millimetres and a depth of 140 millimetres to carry out the installation. As a result, the surface quality remains intact and no additional fastening screws are required.
The Pick MAX transport anchor is supplied as a system case. The system case contains the following parts:
- 2 Pick MAX transport anchors
- 2 shackles
- Drill HMB
- Drill IB
Advantages/features
- Payload of up to 2400 kg per anchor point
- Attached in a few simple steps, no alignment of the lifting gear required.
- Visible surface quality is not damaged No fixing screws required.
- Long service life: 16,000 load cycles (in accordance with EN 13155:2020)
- Versatile application: on the end face, slab side or transverse timber side for beams of all types.
Instructions
- The specifications in the operating instructions enclosed with the item must be observed.
- Have the load handling attachment checked once a year by authorised persons. The details can be found in the enclosed operating instructions.
- Document your inspections in the maintenance log in the operating instructions.
- You are welcome to take advantage of the Pick Check offer.
- The Pick MAX transport anchor is supplied in a system case as a set for 2 lifting points and the required installation material.
- The drill hole may be used a maximum of 6 times for lifting.
- The anchor may be used a maximum of 16,000 times for lifting.