zoom_in
zoom_out
fullscreen
Eurotec KonstruX rBS; countersunk head; blue galvanized; TX40 904803
Sku: T-869181
€206.55 (excl. legal VAT, excl. Shipping)
(€4.13 / Piece)
In stock,ready for shipping within 24h
Carton
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-364681 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 125 mm | 904770 | |
|
T-364682 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 155 mm | 904771 | |
|
T-364683 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 195 mm | 904772 | |
|
T-364684 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 220 mm | 904773 | |
|
T-364685 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 245 mm | 904774 | |
|
T-364686 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 270 mm | 904775 | |
|
T-364687 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 300 mm | 904776 | |
|
T-364688 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 330 mm | 904777 | |
|
T-364689 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 360 mm | 904778 | |
|
T-364690 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 400 mm | 904779 | |
|
T-364691 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 450 mm | 904780 | |
|
T-364692 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 500 mm | 904781 | |
|
T-364693 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 550 mm | 904782 | |
|
T-364694 | KonstruX rBS - countersunk head - blue galvanised - TX50 - 10.0 x 600 mm | 904783 | |
|
T-364695 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 95 mm | 904790 | |
|
T-364696 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 125 mm | 904791 | |
|
T-364697 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 155 mm | 904792 | |
|
T-364698 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 195 mm | 904793 | |
|
T-364699 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 220 mm | 904794 | |
|
T-364700 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 245 mm | 904795 | |
|
T-364701 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 270 mm | 904796 | |
|
T-364702 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 295 mm | 904797 | |
|
T-364703 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 330 mm | 904798 | |
|
T-364704 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 375 mm | 904799 | |
|
T-364705 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 400 mm | 904800 | |
|
T-364706 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 430 mm | 904801 | |
|
T-364707 | KonstruX rBS - countersunk head - blue galvanised - TX40 - 8.0 x 480 mm | 904802 | |
|
T-868837 | KonstruX rBS; countersunk head; blue galvanized; TX50 | 100090 | |
|
T-868838 | KonstruX rBS; countersunk head; blue galvanized; TX50 | 100091 | |
|
T-868839 | KonstruX rBS; countersunk head; blue galvanized; TX50 | 100092 | |
|
T-868840 | KonstruX rBS; countersunk head; blue galvanized; TX50 | 100093 | |
|
T-869182 | KonstruX rBS; countersunk head; blue galvanized; TX30 | 904857 | |
|
T-869183 | KonstruX rBS; countersunk head; blue galvanized; TX30 | 904858 | |
|
T-869184 | KonstruX rBS; countersunk head; blue galvanized; TX30 | 904859 | |
|
T-869185 | KonstruX rBS; countersunk head; blue galvanized; TX30 | 904860 | |
|
T-1482763 | KonstruX countersunk head; stainless steel A4; TX40 | 944795 | |
|
T-1482764 | KonstruX countersunk head; stainless steel A4; TX40 | 944792 | |
|
T-1482765 | KonstruX countersunk head; stainless steel A4; TX40 | 944793 | |
|
T-1482766 | KonstruX countersunk head; stainless steel A4; TX40 | 944794 |
doneDrive: TX
doneDiameter (mm): 8mm
doneDiameter (mm): 8mm
doneOverall length (mm): 545mm
doneThread length (mm): 538mm
doneThread length (mm): 538mm
8.0 x 545 mm
Content:
1 Carton = 50 Piece (€4.13 / Piece)
Shipping:
€41.93 Versandservice to United Kingdom
plus €8.00 stock transfer surcharge
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln This offer is intended exclusively for companies, public institutions,tradespeople and freelancers.
Payment methods:
Returns:
Security:
Product data
Manufacturer:
E.u.r.o.Tec GmbH
Condition:
NEW
Sku:
T-869181
SKU manufacturer:
904803
GTIN Code (EAN):
4251314751997
Weight:
0,11 Kg
All information relating to products from E.u.r.o.Tec GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
KonstruX - A system for all load-bearing connections in timber construction
- In contrast to a partially threaded screw, where the load-bearing capacity is limited by the lower head pull-through resistance in the attachment part, the KonstruX fully threaded screw has high values in the area of thread pull-out resistance.
- Applications can be found in carpentry, timber construction, hall construction, timber frame construction, renovation of storey ceilings, timber element construction and many more
- Highest force transmission compared to classic timber connections or connections such as beam girders, beam shoes, etc.
- Since wood has a low transverse tensile and transverse compressive strength, a KonstruX fully threaded screw is used for reinforcement to absorb the majority of the forces. The KonstruX fully threaded screw connects the components in a displacement-resistant manner, for example in the case of doubling. This reduces the deflection and increases the load-bearing capacity of the beams.
- High fire resistance, invisible connections, no thermal bridges
- The required centre and edge distances can be minimised with exclusive tensile stress.
- Reduced screw-in torque
- Higher pull-out resistance
- In general, no pre-drilling is required according to approval/ETA, but directional pre-drilling to a third of the screw length is recommended from a screw length of 245 mm.
Additional information
Drive:
TX
Diameter (mm):
8mm
Overall length (mm):
545mm
Thread length (mm):
538mm
Head diameter (mm):
14.5mm
Head shape:
Senkkopf
Surface:
blau passiviert
Material:
1.5523
Accessories:
499992|499998|945856|945979|954109
Drive (TX):
40TX
Bore diameter (mm):
8mm
Thread arrangement:
Vollgewinde
upper head angle (degrees):
90Grad
Surface colour:
Blau
Shank milling grooves:
Nein
Layer thickness surface roughness (µ):
5µ
Cutting notch:
Nein
Tip geometry:
ST Spitze
lower head angle (degrees):
60Grad
Subhead milling ribs:
Ja
Zulassung:
ETA-11/0024
Pallet quantity:
4550
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 80 mm
904808
€17.86
(€0.21 / Piece)
Commercial customer offer**
Rolfi, self-adhesive cork pad
100349
€15.42
(€0.73 / Piece)
Commercial customer offer**
Hapatec - stainless steel, hardened - TX25 - 5.0 x 60 mm
111818
€9.23
(€0.05 / Piece)
Commercial customer offer**
Adjustable foot PRO XXS - height adjustment: 1.0 - 1.5 cm - including L/stone adapter
954020
€103.91
(€2.47 / Piece)
Commercial customer offer**
Drywall screw with coarse thread - black phosphated - PH2 - 3.9 x 30 mm
903911
€10.71
(€0.01 / Piece)
Commercial customer offer**
Adjustment block black - 80 x 50 x 20 (L x W x H)
964560
€232.10
(€1.10 / Piece)
Commercial customer offer**
Anchor rod - galvanised steel - 16 x 190 mm
200116
€17.69
(€2.11 / Piece)
Commercial customer offer**
Bit holder 66 mm
500011
€9.03
Commercial customer offer**
Cutter knife - with 8 snap-off blades
800387
€5.92
Commercial customer offer**
Ridge end plate black - 50 x 120 mm
954211
€25.88
(€1.23 / Piece)
Commercial customer offer**
Aluminum concrete angle
975661
€22.44
(€2.67 / Piece)
Commercial customer offer**
Facade screw decorative head; stainless steel hardened; TX25
905577
€16.68
(€0.10 / Piece)
Commercial customer offer**
PediX Duo 190+80
904680
€162.90
(€48.46 / Piece)
Commercial customer offer**
Paneltwistec 1000 washer head - steel special coating 1000 - TX30 - 6.0 x 200 mm
r901365
€49.29
(€0.59 / Piece)
Commercial customer offer**
Color facade screw - stainless steel A2 - TX20 - white RAL 9010 - 4.8 x 25 mm
w904670
€29.92
(€0.14 / Piece)
Commercial customer offer**
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Eurotec KonstruX rBS; countersunk head; blue galvanized; TX40 904803
904803
Eurotec - E.u.r.o.Tec GmbH
EUROTEC
Eurotec GmbH
ATLAS template HFS 200 wood
decking and gardening
garden
KonstruX - A system for all load-bearing connections in timber construction
- In contrast to a partially threaded screw, where the load-bearing capacity is limited by the lower head pull-through resistance in the attachment part, the KonstruX fully threaded screw has high values in the area of thread pull-out resistance.
- Applications can be found in carpentry, timber construction, hall construction, timber frame construction, renovation of storey ceilings, timber element construction and many more
- Highest force transmission compared to classic timber connections or connections such as beam girders, beam shoes, etc.
- Since wood has a low transverse tensile and transverse compressive strength, a KonstruX fully threaded screw is used for reinforcement to absorb the majority of the forces. The KonstruX fully threaded screw connects the components in a displacement-resistant manner, for example in the case of doubling. This reduces the deflection and increases the load-bearing capacity of the beams.
- High fire resistance, invisible connections, no thermal bridges
- The required centre and edge distances can be minimised with exclusive tensile stress.
- Reduced screw-in torque
- Higher pull-out resistance
- In general, no pre-drilling is required according to approval/ETA, but directional pre-drilling to a third of the screw length is recommended from a screw length of 245 mm.