zoom_in
zoom_out
fullscreen
Eurotec KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 80 mm 904808
Sku: T-364708
€17.86 (excl. legal VAT, excl. Shipping)
(€0.18 / Piece)
In stock,ready for shipping within 48h
Carton
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-364709 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 100 mm | 904809 | |
|
T-364710 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 120 mm | 904810 | |
|
T-364711 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 140 mm | 904811 | |
|
T-364712 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 160 mm | 904812 | |
|
T-364713 | KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 195 mm | 904813 | |
|
T-364714 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 300 mm | 904815 | |
|
T-364715 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 330 mm | 904816 | |
|
T-364716 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 360 mm | 904817 | |
|
T-364717 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 400 mm | 904818 | |
|
T-364718 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 450 mm | 904819 | |
|
T-364719 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 500 mm | 904820 | |
|
T-364720 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 550 mm | 904821 | |
|
T-364721 | KonstruX rBS - cylinder head - blue galvanised - TX50 - 10.0 x 600 mm | 904822 | |
|
T-364722 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 155 mm | 904825 | |
|
T-364723 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 195 mm | 904826 | |
|
T-364724 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 220 mm | 904827 | |
|
T-364725 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 245 mm | 904828 | |
|
T-364726 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 295 mm | 904829 | |
|
T-364727 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 330 mm | 904830 | |
|
T-364728 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 375 mm | 904831 | |
|
T-364729 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 400 mm | 904832 | |
|
T-364730 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8,0 x 270 mm | 904834 | |
|
T-364865 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 430 mm | 944804 | |
|
T-364866 | KonstruX rBS - cylinder head - blue galvanised - TX40 - 8.0 x 480 mm | 944805 | |
|
T-868829 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100063 | |
|
T-868830 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100064 | |
|
T-868831 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100065 | |
|
T-868832 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100066 | |
|
T-868833 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100080 | |
|
T-868834 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100081 | |
|
T-868835 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100082 | |
|
T-868836 | KonstruX rBS; cylinder head; blue galvanized; TX50 | 100083 | |
|
T-869209 | KonstruX rBS; cylinder head; blue galvanized; TX40 | 944806 | |
|
T-869210 | KonstruX rBS; cylinder head; blue galvanized; TX40 | 944807 | |
|
T-1482769 | KonstruX Cylinder head; stainless steel A4; TX30 | 944780 | |
|
T-1482770 | KonstruX Cylinder head; stainless steel A4; TX30 | 944781 | |
|
T-1482771 | KonstruX Cylinder head; stainless steel A4; TX30 | 944782 | |
|
T-1482772 | KonstruX cylinder head; stainless steel A4; TX40 | 944783 | |
|
T-1482773 | KonstruX cylinder head; stainless steel A4; TX40 | 944784 | |
|
T-1482774 | KonstruX cylinder head; stainless steel A4; TX40 | 944785 | |
|
T-1482775 | KonstruX cylinder head; stainless steel A4; TX40 | 944786 | |
|
T-1482776 | KonstruX cylinder head; stainless steel A4; TX40 | 944787 | |
|
T-1482777 | KonstruX cylinder head; stainless steel A4; TX40 | 944788 | |
|
T-1482778 | KonstruX cylinder head; stainless steel A4; TX40 | 944789 | |
|
T-1482779 | KonstruX cylinder head; stainless steel A4; TX40 | 944790 | |
|
T-1482780 | KonstruX cylinder head; stainless steel A4; TX40 | 944791 |
done6.5 x 80 mm
doneKonstruX ST cylinder head 6.5mm x 80mm blue galvanized
KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 80 mm - 904808
Content:
1 Carton = 100 Piece (€0.18 / Piece)
Shipping:
€41.93 Versandservice to United Kingdom
plus €8.00 stock transfer surcharge
For orders under €100.84 order total plus €44.54 Surcharge
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln This offer is intended exclusively for companies, public institutions,tradespeople and freelancers.
Payment methods:
Returns:
Security:
Product data
Manufacturer:
E.u.r.o.Tec GmbH
Condition:
NEW
Sku:
T-364708
SKU manufacturer:
904808
GTIN Code (EAN):
4251314715159
Weight:
0,00 Kg
All information relating to products from E.u.r.o.Tec GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- In contrast to a partially threaded screw, where the load-bearing capacity is limited by the lower head pull-through resistance in the attachment part, the KonstruX fully threaded screw has high values in the area of thread pull-out resistance.
- Applications can be found in carpentry, timber construction, hall construction, timber frame construction, renovation of storey ceilings, timber element construction and many more
- Highest force transmission compared to classic timber connections or connections such as beam girders, beam shoes, etc.
- Since wood has a low transverse tensile and transverse compressive strength, a KonstruX fully threaded screw is used for reinforcement to absorb the majority of the forces. The KonstruX fully threaded screw connects the components in a displacement-resistant manner, for example in the case of doubling. This reduces the deflection and increases the load-bearing capacity of the beams.
- High fire resistance, invisible connections, no thermal bridges
- The required centre and edge distances can be minimised with exclusive tensile stress.
- Reduced screw-in torque
- Higher pull-out resistance
- In general, no pre-drilling is required according to approval/ETA, but directional pre-drilling to a third of the screw length is recommended from a screw length of 245 mm.
Additional information
Drive:
TX
Diameter (mm):
6.5mm
Overall length (mm):
80mm
Thread length (mm):
71.5mm
Head diameter (mm):
8mm
Head shape:
Zylinderkopf
Material:
1.5523
Surface:
blau passiviert
Accessories:
499992|499997|945855|945857|945858|945978|954104|954108
Drive (TX):
30TX
Bore diameter (mm):
6.5mm
Thread arrangement:
Vollgewinde
Surface colour:
Blau
Shank milling grooves:
Nein
Layer thickness surface roughness (µ):
5µ
Cutting notch:
Nein
Tip geometry:
Type BS
Tip type:
ST Spitze
lower head angle (degrees):
90Grad
Subhead milling ribs:
Nein
Zulassung:
ETA-11/0024
Pallet quantity:
37000
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
Paneltwistec 1000 countersunk head - steel special coating 1000 - TX20 - 5.0 x 90 mm
r903578
€15.97
(€0.10 / Piece)
Commercial customer offer**
Paneltwistec AG washer head - steel coated - TX30 - 6.0 x 150 mm
945724
€15.59
(€0.19 / Piece)
Commercial customer offer**
Hapatec; Edelstahl gehärtet; TX25; inkl. Langbit, 5,0 x 80 mm
111820-200-BLACK
€25.84
(€0.15 / Piece)
Commercial customer offer**
Wedge anchor ECB-FZ-C3 10.0 x 165 mm
946236
€37.90
(€0.90 / Piece)
Commercial customer offer**
Work gloves E900 M
800526
€22.06
(€2.19 / Piece)
Commercial customer offer**
Shear plate 230x240 - 230 x 240 x 3 mm
954113
€7.61
Commercial customer offer**
Adjustable foot Base 4 with L-adapter - height: 11.0 - 21.0 cm
100003
€54.50
(€3.24 / Piece)
Commercial customer offer**
EcoTec chipboard screw - steel blue galvanised - VG - TX20 - 4,5 x 30 mm
903743
€7.82
(€0.02 / Piece)
Commercial customer offer**
Pressure plate shear angle - 230 x 70 x 12 mm
954111
€11.42
Commercial customer offer**
KonstruX Countersunk head - stainless steel A4 - TX50 - 10x220 mm
905752
€70.29
(€3.35 / Piece)
Commercial customer offer**
Paneltwistec Countersunk head - hardened stainless steel - TX30 - 6.0 x 60 mm
904012
€15.59
(€0.19 / Piece)
Commercial customer offer**
Mounting tape galvanized 10m roll
944915
€29.83
(€7.10 / Piece)
Commercial customer offer**
Ankernägel mit Flachkopf; magaziniert, 4,0 x 50 mm
200244
€56.93
(€0.03 / Piece)
Commercial customer offer**
Paneltwistec countersunk screw - steel blue galvanised - TX30 - 6.0 x 280 mm
b903036
€31.22
(€0.37 / Piece)
Commercial customer offer**
End profile Alu-UK bottom - 45 x 61.5 x 2000 mm (W x H x L)
975640
€21.85
Commercial customer offer**
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Eurotec KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 80 mm 904808
4251314715159
904808
Eurotec - E.u.r.o.Tec GmbH
EUROTEC
Eurotec GmbH
KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 80 mm
KonstruX rBS - cylinder head - blue galvanised - TX30 - 6.5 x 80 mm 4251314715159
Ingenieurholzbau
- In contrast to a partially threaded screw, where the load-bearing capacity is limited by the lower head pull-through resistance in the attachment part, the KonstruX fully threaded screw has high values in the area of thread pull-out resistance.
- Applications can be found in carpentry, timber construction, hall construction, timber frame construction, renovation of storey ceilings, timber element construction and many more
- Highest force transmission compared to classic timber connections or connections such as beam girders, beam shoes, etc.
- Since wood has a low transverse tensile and transverse compressive strength, a KonstruX fully threaded screw is used for reinforcement to absorb the majority of the forces. The KonstruX fully threaded screw connects the components in a displacement-resistant manner, for example in the case of doubling. This reduces the deflection and increases the load-bearing capacity of the beams.
- High fire resistance, invisible connections, no thermal bridges
- The required centre and edge distances can be minimised with exclusive tensile stress.
- Reduced screw-in torque
- Higher pull-out resistance
- In general, no pre-drilling is required according to approval/ETA, but directional pre-drilling to a third of the screw length is recommended from a screw length of 245 mm.