zoom_in
zoom_out
fullscreen
-14%
ELMAG V-belt upright drilling machine 16027
Sku: T-506660
€980.88 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping within 24h
Piece
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-496221 | KBM 25 S VARIO SET promotion consisting of: | 16037 |
doneSäulenbohrmaschinen
doneModel KBM 25 S VARIO
doneModel KBM 25 S VARIO
V-belt upright drilling machine Model KBM 25 S VARIO|Super slim professional pillar drill 1,500 W|This is how professionals drill|With a quill spacing of 365 mm from the drilling bench, the KBM 25 S Vario allows machining of tall workpieces and finished welded components. Clamping grooves in the base plate
expand the space for tall moulded parts.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
expand the space for tall moulded parts.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-506660
SKU manufacturer:
16027
GTIN Code (EAN):
9004853160271
Weight:
95,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Operating lever for speed setting
- Speed adjustment by means of variator disc
- Telescopic drill chuck protection CE
- LED lamp mounted on the side
- Right/left rotation
- Standard features:
- Keyless chuck B 16, 1 - 16 mm
- Taper mandrel MK 3 / B 16
- Drill drift
- Tool set
- Operating instructions/CE
- TB 125 Vario - klein ganz groß, Mit einem Pinolenabstand zum Bohrtisch von 365 mm ermöglicht die KBM 25 S Vario die Bearbeitung von hohen Werkstücken und fertig geschweißten Bauteilen. Spannnuten in der Grundplatte
erweitern den Spielraum für hohe Formteile. - 1. Bohrerauswahl: Für Metalle: Metallbohrer aus Hochleistungs-Schnellschnittstahl (HSS) verwenden. Hartmetall oder Edelstahl: Metallbohrer mit Titanbeschichtung oder aus einer Kobaltlegierung.
2. Ankörnen: Bohrstelle durch Anreißen mit einer Reißnadel markieren. Einen gehärteten Körnerstift ansetzen und Bohrstelle mit einem kurzen Hammerschlag ankörnen - so kann der Bohrer nicht abrutschen. Bei HSS-Bohrern mit Kreuzanschliff kann das Ankörnen entfallen. Bei großen Bohrdurchmessern mit kleinerem Bohrer vorbohren.
3. Drehzahl: Zur Schonung des Bohrers, hartes Metall bei niedriger Drehzahl und mit geringem Druck bohren. Für weichere Metalle höhere Drehzahl verwenden. Vor dem Durchbruch Druck reduzieren.
4. Kühlen: Bohrer kühlen. Bei langen Bohrungen Bohrer mehr-fach anheben und Kühlflüssigkeit zuführen, ev. Bohrpausen einlegen.
Additional information
Drilling capacity in steel (mm):
25mm
Drilling table area (mm):
356 x 356mm
Drilling table stroke (mm):
475mm
Drilling table rotatable ():
± 180°
Drilling table swivelling ():
± 45°
Speed range (UpM):
440 - 2.200UpM
Speed stages ():
stufenlos
Base plate area (lxb) (mm):
420 x 580mm
Height (total) (mm):
1.820mm
Displacement (mm):
285x285x635mm
Engine power (W):
1.500W
Mains connection (V/Hz):
400/50-60V/Hz
Pine pitch table min./max. (mm):
365mm
Pinole gap (mm):
150mm
Column diameter (mm):
80mm
Spindle reception (rotating spindle) ():
MK 3
Thread pitch (mm):
215mm
T-slots, width (mm):
14mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-29%
HSS twist drill case
82031
€61.72
€87.48 MSRP
-31%
Clamping screw 14 mm complete
89033
€18.36
€26.51 MSRP
-11%
Keilriemen-Tischbohrmaschine Modell KBM 15 T VARIO
16083
€337.14
-23%
Vice 3’ / 75 mm
88141
€49.20
€63.99 MSRP
-13%
KBM 16 T VARIO SET - promotion consisting of:
16036
€452.26
Attachment glass - clear
55381
€0.41
-12%
Glass measuring rod Mod. KA 500/120
88822
€329.16
-28%
Propan-Gasdruckregler-Set 700 mbar
9010150
€44.50
€62.01 MSRP
-26%
Ball no. 11
9402841
€0.97
€1.30 MSRP
-24%
Square shaft (no. 6)
9403041
€108.03
€142.00 MSRP
-29%
Lock nut no. 14
9106100
€14.20
€20.00 MSRP
-16%
Motor-Abdeckhaube + Lüfterflügel
9010129
€26.18
-8%
BOMAR metal bandsaw
78916
€17,657.98
-27%
Clamp holder SVJBR 93°
89321
€45.67
€62.98 MSRP
-28%
400 volt switch
9601115
€51.00
€70.50 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG V-belt upright drilling machine 16027
16027
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- Operating lever for speed setting
- Speed adjustment by means of variator disc
- Telescopic drill chuck protection CE
- LED lamp mounted on the side
- Right/left rotation
- Standard features:
- Keyless chuck B 16, 1 - 16 mm
- Taper mandrel MK 3 / B 16
- Drill drift
- Tool set
- Operating instructions/CE