zoom_in
zoom_out
fullscreen
-13%
ELMAG V-belt bench drill 16026
Sku: T-505304
€390.63 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping
Piece
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-504709 | KBM 16 T VARIO SET - promotion consisting of: | 16036 |
doneTischbohrmaschinen
doneModel KBM 16 T VARIO230V, RE run
doneModel KBM 16 T VARIO230V, RE run
V-belt bench drill Model KBM 16 T VARIO
230V, RE-run|Super slim professional column drill 550 W|This is how professionals drill|With a quill spacing of 360 mm from the drilling bench, the KBM 16 T Vario allows machining of tall workpieces and finished welded components. Clamping grooves in the base plate
expand the space for tall moulded parts.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
230V, RE-run|Super slim professional column drill 550 W|This is how professionals drill|With a quill spacing of 360 mm from the drilling bench, the KBM 16 T Vario allows machining of tall workpieces and finished welded components. Clamping grooves in the base plate
expand the space for tall moulded parts.|1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.
2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.
3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.
4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-505304
SKU manufacturer:
16026
GTIN Code (EAN):
9004853160264
Weight:
42,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Operating lever for speed setting
- Speed adjustment by means of variator disc
- Telescopic drill chuck protection CE
- LED light integrated into drilling head
- Clockwise rotation
- Incl. laser drilling indicator
- Standard equipment:
- quick-action drill chuck B 16, 1 - 16 mm
- taper mandrel MK 2 / B 16
- drive-out
wedge - tool set
- operating instructions / CE
- TB 125 Vario - klein ganz groß, Mit einem Pinolenabstand zum Bohrtisch von 360 mm ermöglicht die KBM 16 T Vario die Bearbeitung von hohen Werkstücken und fertig geschweißten Bauteilen. Spannnuten in der Grundplatte
erweitern den Spielraum für hohe Formteile. - 1. Bohrerauswahl: Für Metalle: Metallbohrer aus Hochleistungs-Schnellschnittstahl (HSS) verwenden. Hartmetall oder Edelstahl: Metallbohrer mit Titanbeschichtung oder aus einer Kobaltlegierung.
2. Ankörnen: Bohrstelle durch Anreißen mit einer Reißnadel markieren. Einen gehärteten Körnerstift ansetzen und Bohrstelle mit einem kurzen Hammerschlag ankörnen - so kann der Bohrer nicht abrutschen. Bei HSS-Bohrern mit Kreuzanschliff kann das Ankörnen entfallen. Bei großen Bohrdurchmessern mit kleinerem Bohrer vorbohren.
3. Drehzahl: Zur Schonung des Bohrers, hartes Metall bei niedriger Drehzahl und mit geringem Druck bohren. Für weichere Metalle höhere Drehzahl verwenden. Vor dem Durchbruch Druck reduzieren.
4. Kühlen: Bohrer kühlen. Bei langen Bohrungen Bohrer mehr-fach anheben und Kühlflüssigkeit zuführen, ev. Bohrpausen einlegen.
Additional information
Drilling capacity in steel (mm):
16mm
Drilling table area (mm):
243 x 243mm
Drilling table stroke (mm):
275mm
Drilling table rotatable ():
± 180°
Drilling table swivelling ():
± 45°
Speed range (UpM):
340 - 2.200UpM
Speed stages ():
stufenlos
Base plate area (lxb) (mm):
250 x 415mm
Height (total) (mm):
910mm
Displacement (mm):
195x195x360mm
Engine power (W):
550W
Mains connection (V/Hz):
230/50-60V/Hz
Pine pitch table min./max. (mm):
360mm
Pinole gap (mm):
90mm
Column diameter (mm):
60mm
Spindle reception (rotating spindle) ():
MK 2
Thread pitch (mm):
150mm
T-slots, width (mm):
14mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Product suggestions
-29%
HSS twist drill case
82031
€61.72
€87.48 MSRP
-31%
Clamping screw 14 mm complete
89033
€18.36
€26.51 MSRP
-23%
Vice 3’ / 75 mm
88141
€49.20
€63.99 MSRP
-14%
KBM 25 S VARIO SET promotion consisting of:
16037
€1,053.49
-40%
HSS Co5 shell end mill DIN 1880
74202
€185.00
€307.98 MSRP
-16%
HF plug 10 pin
9505580
€55.13
-29%
CONDOR pressure switch
11920
€39.16
€55.00 MSRP
-13%
Glass measuring rod Mod. KA 300/1020
88819
€451.22
-27%
Cylinder head gasket bottom no. 15
9100456
€8.07
€11.09 MSRP
-22%
ELMAG START SET 6-piece
42091
€24.96
€32.02 MSRP
-8%
BOMAR metal bandsaw
78918
€21,674.87
-27%
Clamp holder SVJBR 93°
89321
€45.67
€62.98 MSRP
-26%
Ball no. 11
9402841
€0.97
€1.30 MSRP
-29%
Board no. 49
9708810
€143.15
€202.98 MSRP
Attachment glass - clear
55381
€0.41
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG V-belt bench drill 16026
16026
ELMAG Entwicklungs- und Handels GmbH
Metal Processing
- Operating lever for speed setting
- Speed adjustment by means of variator disc
- Telescopic drill chuck protection CE
- LED light integrated into drilling head
- Clockwise rotation
- Incl. laser drilling indicator
- Standard equipment:
- quick-action drill chuck B 16, 1 - 16 mm
- taper mandrel MK 2 / B 16
- drive-out
wedge - tool set
- operating instructions / CE