Eurotec catalogue fastening technology Page 182
Commercial customer offer**Top sellers from Eurotec
Timber engineering Operating instructions for the ball supporting bolt Warning! Ball supporting bolts are designed for lifting and holding individual loads (not people!!!). In addition, they are not suitable for continuous load rotation. Contamination (e.g. grinding sludge, oil and emulsion deposits, dust, etc.) can impair the function of ball supporting bolts. Damaged ball supporting bolts can put people’s lives at risk. Before each use, ball supporting bolts must be inspected for visible defects (e.g. deformations, fractures, cracks, damage, missing balls, corrosion, function of the unlocking mechanism). Damaged ball supporting bolts must be withdrawn from further use. The ball carrier bolts have been tested by TÜV. A Handling and loading Press the button (A) to release the balls. The balls are locked again by releasing the button (A). Please note: The button (A) is locked when the spring force has caused it to spring back to its original position. Do not press the button when loaded! The load values F1 / F2 / F3 (see page 2) apply to lifting in a steel receptacle and x min. = 1.5 mm Maintenance Ball supporting bolts must be subjected to a safety inspection by a competent person at least once a year. Visual inspection Deformations, fractures, cracks, missing / damaged balls, corrosion, screw connection damage on the shackle. Functional test The balls’ locking and unlocking mechanism must close automatically by spring force. Full shackle mobility is guaranteed Use The Lifting Anchor Mini must only be used by competent staff. d1 l1 d2 d3 d4 min. l2 l3 20,0 50 24,50 30,0 25,00 36,5 19,70 l4 l5 52,0 l6 32,6 l7 36 * with five-fold protection against breakage Original EC conformity mark The product complies with the regulations set down in the EC Directive 2006/42/EC. Manufacture*: Address*: Erwin Halder KG Erwin-Halder-Straße 5-9 88480 Achstetten-Bronnen Deutschland Make: Type: Applied standards: Ball supporting bolt EH 22350 DIN EN 13155 Achstetten-Bronnen, 22. Dezember 2016 *Responsible for documentation 182 Stefan Halder, Geschäftsleitung l8 56 114,0 x min.* x max.* D H11 F1 kN* F2 kN* F3 kN* 1,5 10,0 8,5 6,5 25 20,0
444 Pages | Valid until 12/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.