Eurotec Aluminium system bracket Twin - including screws and bit 945959

For indirect fastening of decking boards to aluminium substructures.

Applicable for the invisible fastening of laterally grooved decking made of low-movement wood (e.g. larch, thermowood). Larch, thermowood) or WPC on:

• Eurotec EVO aluminium system profile
• Eurotec EVO Slim** aluminium system profile
• Eurotec HKP decking support system
• Product description
• The Twin system bracket provides the required hold between two wooden or WPC decking boards. A stainless steel clamping plate engages in the board groove. The clamping plate is screwed to the aluminium substructure using a drilling screw in the joint. Spacer domes ensure a uniform joint pattern.
• Clamping plate
• Dimensions: 20.5 x 2 x 30 mm
• Material: Stainless steel A2, black
• Advantages
  • Solution for indirect/invisible fastening solution
  • Re-adjustment or replacement of individual boards is possible at any time
  • Can be used with the Eurotec EVO and EVO Slim system profiles as well as the Eurotec decking support system HKP HKP support system
  • Uniform joint pattern
  • Improved air circulation supports structural wood protection
  • Weather-resistant
• Suitable for decking boards with the following groove geometries:
  • Groove depth T: 7.5 mm
  • Groove width B: 2.0 mm
  • Groove thickness S: 2.0 12.0 mm
• Whether the desired wood is suitable for the type of fastening may need to be checked with the manufacturer/supplier.
• Important information
• For technical information on application and installation, please refer to the product data sheet on our website!
• *Screws included
• **If the application is to be used in combination with the Eurotec EVO Slim system profile, a shorter screw must be used. This screw is not included in the scope of delivery and must be ordered separately. If you use the enclosed screw ø 5 x 50 mm, there is a risk of damaging components below the substructure, such as roof waterproofing.