Pneumax - Hauptkatalog Page 569
Commercial customer offer**Top sellers from Pneumax GmbH
Solenoid valves manifold Series 3000 M8 analogue inputs modules General - M8 analogue inputs modules CODE SIGNAL ANALOGUE INPUTS MAXIMUM CURRENT ON +24 VDC RAIL OCCUPIED INPUTS 5230.2T.00 VOLTAGE 0-10V 2 300 mA 32 (4 Byte) 5230.2T.01 VOLTAGE 0-5V 2 300 mA 32 (4 Byte) 5230.4T.00 VOLTAGE 0-10V 4 750 mA 64 (8 Byte) 5230.4T.01 VOLTAGE 0-5V 4 750 mA 64 (8 Byte) 5230.2C.00 CURRENT 4-20mA 2 300 mA 32 (4 Byte) 5230.2C.01 CURRENT 0-20mA 2 300 mA 32 (4 Byte) 5230.4C.00 CURRENT 4-20mA 4 750 mA 64 (8 Byte) 5230.4C.01 CURRENT 0-20mA 4 750 mA 64 (8 Byte) Ordering code 5230._ _.0_ 1 AIR DISTRIBUTION M8 analog inputs module digitizes analog signals and transfer acquired data to field bus, via network node. Each input is sampled at 12 bits and transmitted, for convenience, at 16 bit, whose less significant bits padded to 0. Therefore, each digitized signal takes 16 inputs (2 bytes) of the serial node. During the ordering process, it is necessary to verify that the serial node has enough free inputs. Following table reports available models: Power supply of the M8 analog inputs module is provided by 24VDC power input on the serial system (type A, 4 pin M12 power connector, pin 1) or by module 5030.M12, in case it were installed upstream of the inputs module. Modules provide M8 3 pins female connectors and a diagnostic LED for every analog input. The LED indicates signal presence (green) or signal out of range (red). Maximum available current for each channel on 24VDC rail (pin 1) is reported in the table. Each module provides an internal resettable fuse, which cuts 24VDC power supply to every M8 connector and turning off green PWR LED when thresholds are exceeded. Inputs of other eventual modules connected to the node continue to operate uninterrupted. By removing the cause of the threshold overrun, green PWR LED gets back in ON status and the module becomes operational again. Scheme / Overall dimensions and I/O layout 90 42 28 M8 3P female connector 4 3 1 42 DESCRIPTION 1 + 24 VDC (INPUTS) GND 4 INPUT 28 3 90 PIN Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 | 549
1106 Pages | Valid until 06/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.