Pneumax - Hauptkatalog Page 570
Commercial customer offer**Top sellers from Pneumax GmbH
Solenoid valves manifold Series 3000 M8 analogue outputs modules General - M8 analogue outputs modules M8 analog outputs module converts output data, received from field bus via network node, into analog signal. Each analog output has a resolution of 12 bits, processed from 16 outputs (2 bytes), ignoring 4 less significant bits. During the ordering process, it is necessary to verify that the serial node has enough free outputs. Different models are available: CODE SIGNAL ANALOGUE OUTPUTS MAXIMUM CURRENT ON + 24 VDC RAIL OCCUPIED OUTPUTS 5130.2T.00 VOLTAGE 0-10V 2 1A 32 (4 Byte) 5130.2T.01 VOLTAGE 0-5V 2 1A 32 (4 Byte) 5130.4T.00 VOLTAGE 0-10V 4 2 A (1A for each pair of channel) 64 (8 Byte) 5130.4T.01 VOLTAGE 0-5V 4 2 A (1A for each pair of channel) 64 (8 Byte) 5130.2C.00 CURRENT 4-20mA 2 1A 32 (4 Byte) 5130.2C.01 CURRENT 0-20mA 2 1A 32 (4 Byte) 64 (8 Byte) 64 (8 Byte) 5130.4C.00 CURRENT 4-20mA 4 2 A (1A for each pair of channel) 5130.4C.01 CURRENT 0-20mA 4 2 A (1A for each pair of channel) Power supply of the M8 analog outputs module is provided by 24VDC power input on the serial system (type A, 4 pin M12 power connector, pin 4) or by module 5030.M12, in case it were installed upstream of the outputs module. Modules provide M8 3 pins female connectors and a diagnostic LED for every analog input. The LED indicates signal presence (green) or overload fault (red). Maximum available current for each channel on 24VDC rail (pin 1) is reported in the table. Each module provides an internal resettable fuse, which cuts 24VDC power supply to every M8 connector and turning off green PWR LED when thresholds are exceeded. Outputs of other eventual modules connected to the node continue to operate uninterrupted. By removing the cause of the threshold overrun, green PWR LED gets back in ON status and the module becomes operational again. Scheme / Overall dimensions and I/O layout 90 42 28 M8 3P female connector 4 3 1 42 PIN DESCRIPTION 1 +24 VDC (OUTPUTS) GND 4 OUTPUT 90 3 28 AIR DISTRIBUTION 1 1 | 550 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Ordering code 5130._ _.0_
1106 Pages | Valid until 06/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.