AMF Catalogue Hydraulic clamping systems Page 291
Commercial customer offer**Top sellers from AMF Spannsysteme
Coupling elements No. 6989N Coupling nipple, threaded design max. operating pressure [bar] Min. coupling force * (N) [A] Nominal bore [NW] M20x1,5 3 350 94 ● M20x1,5 3 350 - M24x1,5 5 ● M24x1,5 5 Article no. for coupling under pressure for pressure-free coupling Thread 324509 6989N-05-001 ● - 324525 6989N-06-002 - 164962 6989N-10-001 ● 164988 6989N-20-002 - Order no. Md Coupling stroke Q max. Weight [Nm] [mm] [l/min] [g] 15 4,5 8 30 94 15 4,5 8 30 500 98 20 4,5 12 56 500 98 20 4,5 12 56 * at 0 bar; corresponds to the spring force complete including coupling nipple spring Design: Cylinder body and internal parts made of stainless steel. Seals from NBR, Viton, POM and PU. Application: Couplings are used for the leakage-free connection of hydraulic oil supplies. The coupling elements are installed in a body. The sealing between coupling mechanism and nipple is axial, and installed in the coupling mechanism. If the seal is worn, it can be replaced. The coupling mechanism must always be used in combination with a nipple of the same system. Depending on the version, the couplings can be connected and disconnected at the maximum working pressure. Features: For connection, the coupling mechanism and nipple must be axially aligned. The mounting housings of the two parts must be guided approx. 2-3 mm before contact with the axial sealing surfaces. The radial position tolerance must not be exceeded. The coupling force between coupling nipple and mechanism due to hydraulic pressure is given by the formula NW3: F [N] = 9,4 x p [bar], NW5: F [N] = 15,4 x p [bar] and must be applied in a force-locking or form-locking manner from the outside. The mounting hole must be machined to the specified accuracy and surface finish. Note: The axial sealing surfaces on the front must be protected from soiling. Because the coupling elements have smooth, uninterrupted sealing surfaces, the danger of them being soiled is reduced, and the ease with which the user can clean them before the coupling process is increased. Good results can be achieved by washing them off and blowing clean with compressed air. Positioning tolerance in axial direction for all coupling elements: +0.5 mm. Positioning tolerance in radial direction for coupling units: +/- 0.3 mm. Permitted angle tolerance: +/- 1°. Screw-in tool: Size 05 and 06 order no. 552759 / size 10 and 20 order no. 552760 On request: Other sizes available on request. Installation dimensions: Dimensions: rounded edge Order no. Article no. dia. B C D G dia. H K L M dia. N P ØR 324509 6989N-05-001 16 23 8,4 25,9 9,8 13 4,5 19 5 15,5 2 x 2,6 324525 6989N-06-002 16 23 8,4 25,9 9,8 13 4,5 19 5 15,5 2 x 2,6 164962 6989N-10-001 20 25 8,5 27,0 13,5 14 4,5 19 5 18,5 4 x 2,8 164988 6989N-20-002 20 25 8,5 27,0 13,5 14 4,5 19 5 18,5 4 x 2,8 Diagrams: alternatively Flow resistance: Coupling force: p-characteristic with HLP 22, viscosity 34 cst NW3: F [N] = 9,4 x p [bar] NW5: F [N] = 15,4 x p [bar] p in (bar) Coupling force F [N] detail X CAD Flow Q (l/min) Operating pressure p [bar] Subject to technical alterations. ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de Hydraulic clamping systems 291
384 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.