AMF Catalogue Hydraulic clamping systems Page 116
Commercial customer offer**Top sellers from AMF Spannsysteme
swing clamps No. 6951KP Swing clamp, top-flange-mounting, precision design CAD Double-acting, max. operating pressure 350 bar, min. operating pressure 35 bar. eff. piston area Lo [cm²] Q max. * [cm³] eff. piston area Sp [cm²] [l/min] [g] 2,3 0,63 1,60 0,276 358 0,92 2,3 0,63 1,60 0,276 358 3,82 7,8 1,90 3,88 0,764 871 20,0 3,82 7,8 1,90 3,88 0,764 871 31,0 5,90 11,96 1,90 3,88 0,764 1114 31,0 5,90 11,96 1,90 3,88 0,764 1114 29,5 11,90 23,0 4,04 7,92 1,785 1465 Article no. Clamping force at 350 bar Sp* [kN] Clamping force at 350 bar Lo* [kN] Clamping stroke M [mm] Total stroke N Vol. Sp Vol. Lo [mm] [cm³] 327841 6951KP-02-21 2,0 5,1 5,5 14,0 0,92 327866 6951KP-02-22 2,0 5,1 5,5 14,0 327882 6951KP-05-21 4,9 10,0 8,0 20,0 327908 6951KP-05-22 4,9 10,0 8,0 562237 6951KP-05-210 4,9 10,0 19,0 562238 6951KP-05-220 4,9 10,0 19,0 327924 6951KP-11-21 11,6 18,2 13,0 Order no. Weight 327940 6951KP-11-22 11,6 18,2 13,0 29,5 11,90 23,0 4,04 7,92 1,785 1465 562239 6951KP-11-210 11,6 18,2 34,0 51,0 20,48 40,15 4,04 7,92 1,785 2223 562240 6951KP-11-220 11,6 18,2 34,0 51,0 20,48 40,15 4,04 7,92 1,785 2223 Cl = clamping, Rel = release, ending of item no.: -21 = dual-action, right-pivoting / -22 = dual-action, left-pivoting / -210 = dual-action, right-pivoting, long clamping stroke / -220 = dual-action, left-pivoting, long clamping stroke * details with clamp arm, standard Design: Cylinder barrel made of steel, hardened and burnished. Piston rod case hardened and chrome plated. Piston rod with internal thread and clamp arm positioning. O-ring for flange seal. Wiper on the piston rod. Clamp arm not supplied as standard. Oil supply via threaded connection or oil channel in the fixture body. Application: The swivel clamp is used in fixtures in which the workpiece must be freely accessible and inserted from above. Even workpieces with difficult shapes can be clamped using special clamp arms (available on request). Features: The swing motion is executed via three ball guides, thereby increasing positioning accuracy, repeat accuracy and service life. Note: The piston stoke is executed with spheres, so volume flow Q max. must be complied with. Clamping arm length and clamping arm weight must be strictly observed. No force may be applied to the piston when mounting accessories to it. To equalise height differences on the workpiece, the vertical clamping path must be 50% of the clamping stroke. When placing into operation, ensure that all air is bled from the system. To control the oil feed, the throttle/check valve no. 6916-12-01 can be optionally used with G1/8 and 6916-12-04 with G1/4 . To achieve a controlled clamping sequence, there is the option of screwing the sequence valve 6918-XX-XXX directly into the threaded connection. Other swivel angles are available on request. Subject to technical alterations. 116 Hydraulic clamping systems ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
384 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.