AMF Catalogue magnetic clamping systems Page 16
Commercial customer offer**Top sellers from AMF Spannsysteme
Control units No. 2970SGH-10 Control unit for a magnetic clamping plate ! new Order no. 561438 Length Width Height Weight [mm] [mm] [mm] [Kg] 300 250 210 12 Application: Control unit for a magnetic clamping plate. The control unit has three operating keys: 1 x Magnetisation (MAG) 1 x Demagnetisation (DEMAG) 1 x Release To start the magnetisation or demagnetisation cycle, the following button combinations must be pressed simultaneously: - Magnetisation = MAG + Release - Demagnetisation = DEMAG + Release Features: The connection cable and control lead have a length of 3 metres each. The connection cable has a plug for 400V / 32A and is pre-installed ready for connection. The high-quality control cable has a sheathing made of steel mesh and an IP65 bayonet connector for connection to the magnetic clamping plate. The control unit can optionally be controlled with the hand-held controller. Connection to machine PLC is possible. The control unit has a prepared cable bushing for the machine locking device signal. The holding force of the magnetic clamping plate can also be set with our hand-held controller 562876. Advantage: - Compact and connection-ready controller for a magnetic clamping plate - Short cycle times (approx. 1 second) for magnetisation or demagnetisation - No further installation necessary, such as of a connector plug - Very solid and robust construction No. 2970SGH-20 Control unit with channel selection incl. holding force regulation ! new Number of magnetic clamping plates to control Length Width Height Weight [St] [mm] [mm] [mm] [Kg] 565374 1-2 400 300 210 15 561439 1-4 400 300 210 18 Order no. Application: Control unit with hand-held controller for the activation of 1-2 or 1-4 magnetic clamping plates. The individual plates can be selected and removed with the hand-held controller. In addition, it controls the holding force regulation and also the system analysis. To start the magnetisation or demagnetisation cycle, the following key combinations must be pressed simultaneously: - Magnetisation = MAG + Release - Demagnetisation = DEMAG + Release Features: The connection cable and control lead have a length of 6 metres each. The connection cable has a plug for 400V / 32A and is pre-installed ready for connection. The high-quality control cable has a sheathing made of steel mesh and an IP65 bayonet connector for connection to the magnetic clamping plate. The hand-held controller is supplied as standard. It can be used to set the holding force, if desired. The control unit has a prepared cable bushing for the machine locking device signal. Advantage: - Compact and connection-ready controller for 1-2 or 1-4 magnetic clamping plates - Short cycle times less than 1 second for magnetisation or demagnetisation - Including hand-held controller as remote control for convenient handling - No further installation necessary, such as of a connector plug - Very solid and robust construction Subject to technical alterations. 16 Magnetic claMping systeMs ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
20 Pages | Valid until 12/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.