TOX product catalogue Page 85
Commercial customer offer**Top sellers from TOX-DÜBEL
Building materials & Holding values Contact Plus 7 M8 M10 M12 Effective anchoring depth hef 80 mm 90 mm 110 mm Permissible central tension load of a single wall plug without environmental effects Nzul in uncracked concrete C20/25 Galvanised, property class 5.8 480 kg 630 kg 990 kg A4, property class 70 480 kg 630 kg 990 kg Permissible shear load of a single wall plug without environmental effects Vzul in uncracked concrete C20/25 Galvanised, property class 5.8 460 kg 740 kg 1090 kg A4, property class 70 520 kg 780 kg 1140 kg Minimum component thickness hmin 110 mm 120 mm 150 mm minimum centre distance smin 60 mm 70 mm 85 mm minimum edge distance cmin 60 mm 70 mm 85 mm Drill core diameter d0 10 mm 12 mm 14 mm Drill hole depth h1 80 mm 90 mm 110 mm Through hole in the component to be connected df 9 mm 12 mm 14 mm Torque when anchoring Tinst 10 Nm 20 Nm 40 Nm Component dimensions and installation characteristics Chemical / Heavy Duty Permissible tension and shear load of an individual wall plug in uncracked, dry concrete with premium cleaning and for anchorings at -40° C to 50° C (or briefly up to 80° C) When sizing, the entire declaration of performance of the Contact Plus 7 must be observed The partial safety factors of the resistances specified in the approval and a partial safety factor of γF = 1.4 are to be considered. Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads) Description & Area of Application Composite anchor glass cartridge with components separated from each other To be processed in combination with threaded rod Stix For fastening steel structures, railings, high shelves, baseplates, supports, wooden structures without spreading pressure Processing & Installation Clean drill hole Insert the mortar cartridge into the drill hole 1. Drilling 4. Screw in threaded rod 2. Clean drill hole 5. Rotation STOP in case of mortar leakage Slowly vibrate the threaded rod in by hammering and turning with a drill until excess mortar is visible The specified torque and curing time must be observed Pre-positioned installation min. 2x min. 2x min. 2x 3. Insert cartridge 6. Screw on attachment 85
216 Pages | Valid until 12/2023 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.