TOX product catalogue Page 73
Commercial customer offer**Top sellers from TOX-DÜBEL
Building materials & Holding values Machine Wall Plug HAC M8 Effective anchoring depth 50 mm Tensile force of a single anchor without environmental effects 430 kg uncracked concrete C20/25 Shear load of a single anchor without environmental effects 840 kg uncracked concrete C20/25 Minimum axis distance smin 75 mm Minimum edge distance cmin 75 mm Drill core diameter d0 14 mm Drill hole depth h1 55 mm Through hole in the component to be connected df 9 mm Torque when anchoring Tinst 25 Nm Concrete C 20/25 Solid brick MZ 12 M6 80 kg * Pirat Sven-O: Concrete C 20/25 Solid brick MZ 12 Pirat Sven-S: Vertically perforated brick ≥ Hlz12 Bulk density ≥ 1 kg/cm³ Hollow brick ≥ Hbl2 Cellular concrete ≥ PB2, PP2 - - - Vertically perforated brick ≥ Hlz12 Hollow brick Bulk density ≥ 1 kg/cm³ ≥ Hbl2 Cellular concrete ≥ PB2, PP2 Gypsum plasterboard 12.5 mm - Gypsum fibreboard 12.5 mm - Gypsum plasterboard 12.5 mm - Gypsum fibreboard 12.5 mm - M6 200 kg * - - - M8 360 kg * - - - - - M10 480 kg * - - - - - M12 630 kg * - - - - - Heavy Duty / Steel Component dimension and installation characteristics The anchoring depth of the wall plug must be observed Drilling method and drill hole cleaning must be adapted to the building material The recommended loads only apply to installation in the building material, not for installation in joints Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads) *only for solid masonry with dense structure / holding values depend on building material Description & Area of Application Machine wall plug HAC without screw Heavy-duty fastening with standard screws and threaded rods Anchor sleeve made of galvanised steel For temporary and permanent fixings Processing & Installation Only suitable for dry indoor areas For concrete and solid masonry with dense structure 1. Drilling 2. Clean drill hole 4. Tighten screw Result in concrete Pre-positioned installation The specified torque must be observed 3. Drive in anchor 73
216 Pages | Valid until 12/2023 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.